Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Colt Lawman .357: Reviews?

Discussion in 'Handguns: Revolvers' started by HMMurdock, Mar 29, 2007.

Thread Status:
Not open for further replies.
  1. HMMurdock

    HMMurdock Member

    Joined:
    May 5, 2006
    Messages:
    431
    Location:
    Indiana, the home of John Dillinger
    I've got a nickel-plated snuby-nosed Colt Lawman MKIII in .357 Magnum on hold for me because I wanna try it out. Anyone here have an opinion on these? Good or bad, let 'er rip!
     
  2. dfariswheel

    dfariswheel Member

    Joined:
    Dec 26, 2002
    Messages:
    6,121
    The Colt "J" frame was Colt's replacement for all the older revolvers they could no longer afford to sell due to the extensive hand fitting required to assemble them.

    The replacement was the Colt "J" frame made as the Trooper Mark III, Lawman Mark III, Metropolitan Police, and Official Police Mark III.,
    The Lawman Mark III was made from 1969 to 1983, and there was a slightly improved Lawman Mark V made in 1984 and 1985.

    The Lawman was available in a 4" un-shrouded barrel and a 2" barrel rounded butt version.
    The 2" Lawman early versions also had an un-shrouded, exposed ejector rod, but later production models had a heavy shrouded barrel that looks like a giant Detective Special.

    The guns were available in bright blue, bright nickel, and satin electroless nickel also known as "Coltguard".

    These are extremely strong, high quality guns that are a definite step above most anything made today.
    Master gunsmith Jerry Kuhnhausen considered them to be the strongest medium frame double action revolvers ever made.

    The only possible weakness is that the guns shouldn't be dry fired without snap caps, since the firing pin "might" break, and this REQUIRES a trip back to Colt for replacement. This requires special equipment to prevent damaging the frame, so it's a factory ONLY job.

    Other than that, the Lawman is a tank.
     
  3. Gordon

    Gordon Member

    Joined:
    Dec 26, 2002
    Messages:
    8,298
    Location:
    central Kali.
    AND an EAR WAX gun!;)
     
  4. HMMurdock

    HMMurdock Member

    Joined:
    May 5, 2006
    Messages:
    431
    Location:
    Indiana, the home of John Dillinger
    Ear Wax Gun?

    Also, this comes in the Nickel finish but I wouldn't mind having something less flashy.

    Anyone think refinishing an original Colt MKIII is a crime?
     
  5. ArchAngelCD

    ArchAngelCD Member

    Joined:
    Nov 25, 2006
    Messages:
    22,125
    Location:
    Northeast PA, USA
    dfariswheel,
    That was a great report, thank you for all the information...

    Sounds like a great gun HMMurdock, go pick it up!! :D
     
  6. HMMurdock

    HMMurdock Member

    Joined:
    May 5, 2006
    Messages:
    431
    Location:
    Indiana, the home of John Dillinger
    Most certainly, and I apologize for not yet thanking you for the magnificent info, dfariswheel! Thank you very much!
     
  7. Gordon

    Gordon Member

    Joined:
    Dec 26, 2002
    Messages:
    8,298
    Location:
    central Kali.
    For some reason the 2" Lawman is the loudest gun I own. In the old days of the 70's when I used one on the job, it was notorious as an "ear wax gun" . :D
     
  8. Texas Colt

    Texas Colt Member

    Joined:
    May 30, 2005
    Messages:
    629
    Location:
    Central Texas
    I have the exact same gun... a 2" nickel MKIII and I love it. I say go for it!

    While it may be a little too heavy for pocket carry, mine rides real nice in a belt scabbard from Don Hume. Check out the link for a post about my MKIII.

    http://www.thehighroad.org/showthread.php?t=153461
     
  9. HMMurdock

    HMMurdock Member

    Joined:
    May 5, 2006
    Messages:
    431
    Location:
    Indiana, the home of John Dillinger
    Gorgeous! Thanks for the link.
     
    Last edited: Apr 2, 2007
  10. shadowpdf

    shadowpdf Member

    Joined:
    Feb 25, 2007
    Messages:
    16
    Location:
    Portland, Oregon
    Just Got mine

    I fell for the Lawman the moment I saw it. It looks to be a sturdy work-a-day gun. Very utilitarian, but I like that look. I found one a couple of weeks ago and purchased it relatively inexpensively. It's a four inch with exposed cylinder rod (no underlug, yeah!). The bottom of the barrel adjacent to the cylinder rod has been flattened for clearance. It was made in 1975, so it's got a few miles on it, but it's in great shape ... locks up tight and the cylinder virtually snaps into place with the pull of the trigger. I'll be testing it this weekend. Can't wait.
     
  11. Bart Noir

    Bart Noir Member

    Joined:
    Mar 20, 2003
    Messages:
    887
    Location:
    Mossy part of Washington
    I have a 4-inch round butt Lawman Mark III. And a 2-inch round butt Lawman.

    Ya, the first may be the only one in the world, since I paid a gunsmith to put a 4-inch tube on a 2-inch Lawman. Because Colt milled the front sight crooked and that just bugged me!

    The round butt fits my hand so very well, and I tried a Tyler T-Grip and decided it dis-improved the fit to my hand. Naturally YMMV as in all things about grips.

    The double action pull is typical Colt, meaning it stacks at the end. I rather like that. But the DA trigger takes more pull than the D-frames, such as Detective Special.

    I've only ever seen 6 of the short barrel Lawmen for sale, and my friend and I bought half of those. Consider this a strong endorsement.

    Bart Noir
     
  12. SaxonPig

    SaxonPig Member

    Joined:
    Apr 11, 2006
    Messages:
    4,787
    Had a blued one about 30 years ago. Nothing wrong with it except is a big and heavy gun. Sort of cool, really. Can't recall why I sold mine. Must have wanted something else. I did a lot of that when I was young and foolish.
     
  13. Leadbutt

    Leadbutt Member

    Joined:
    Jan 3, 2003
    Messages:
    363
    Location:
    Tidewater,Virginia
    I still have my blued version, it wears bone grips and a Tyer "T", I carried it for 2 years while waiting to get home and back to the "N" frame Smith.

    ITs a great handgun and mine loved the 145 grain silver tips, and was a real hoot with the old Super-Vel 110 grain screamers..

    Tell ya one thing that nice rounded butt made a great skull popper
     
Thread Status:
Not open for further replies.

Share This Page