Coonan range report and 1911 size comparison

Status
Not open for further replies.

Damon555

Member
Joined
Jul 7, 2008
Messages
1,050
Location
Not really where I wanna be
I was bitten by the Coonan 357 bug some years ago when my brother mentioned that he wanted one....Well, after waiting a few years to be able to afford one the progression from "wanting" to in my grubby little hands has moved rapidly. I ordered the Coonan Classic from Buds on Sunday and had it in my possession on Wednesday. I hit the range last night and today because I wasn't about to wait to shoot this incredible handgun. Here are my impressions of it and a little background on my other 1911 also....

Since purchasing my Kimber Eclipse Custom II I've held all 1911's that I've encountered to that standard. The Eclipse is simply a wonderful gun in its own right. Beautiful and refined with a trigger that is to die for from a factory pistol. I have never experienced any of the negativity that others have complained about online with Kimber's.....All of their 1911 have been excellent pistols from what I've gathered.....and that's been more than a few. But the Eclipse was the lone 1911 survivor in my collection....mostly due to other "wants" that got the others traded or sold off.

So how did the Coonan perform? 150 rounds of my hot 140 grain JHP 357 reloads have gone through the gun without a hiccup.....That's with me shooting it and 2 other fellas at the range that wanted to give it a go too.

The pivoting trigger, although different from the standard 1911's straight pull, is quite nice....very little take up, a nice clean break and a minute amount of over travel. It certainly is right up there with some of the best factory handgun triggers that I've ever encountered. The sights are nice and bright of the 3 dot variety. They are fixed but shot my handloads perfectly to point of aim from 7-25 yards.

The grips along with the front and back straps are smooth. I thought that might be a problem but it didn't affect my ability to hold on to the pistol during recoil one bit. It actually feels quite good in the hand. Plain as they might be the grip panels work well for this application.

As expected the muzzle blast and flash are impressive. Everyone knows when you pull the trigger by the flash that goes about 5 feet out from the muzzle and the concussion. But the bark is much worse than the bite. Recoil is not much more than my Kimber 45's. Really it's very controllable....even for a novice shooter (one of the other guys who shot it was very new to handgun shooting and had no problems).

The controls are well engineered just like any other 1911. I'm a lefty and have been shooting handguns for many years without a problem........I've just learned to overcome the right handed world that we live in....especially with guns.

Here are a few pictures to give you guys some idea of the size differences of these very different but similar handguns.....(and yeah, their dirty, I just shot the heck out of them both!)

Coonan Kimber (1).jpg

Coonan Kimber (2).jpg

I was a little worried that the pistol would be too large for my average sized hands because I had never even held one before and online reviews mentioned that it was bigger than the standard 1911.....So the purchase was in good faith that it would be fine.....It turned out that the size differences in the grips are minimal. Yes it's thicker by about 1/4" front to back but it certainly isn't much thicker....barely even noticeable really.

Coonan Kimber (3).jpg

The fit and finish of the Coonan is top notch all the way. No shortcuts taken here. After a good douching with oil the gun is very smooth and I expect it to get even better with time. The gun is entirely made in America...which is a great selling point in my opinion. I suspect that their customer service would also be great if I ever needed it.

I've been shooting for almost 35 years and am no stranger to a handgun.....but I'm no expert that for sure so take this review for what it's worth.....one man's experience with a gun I never thought that I would ever be able to afford!
 
Damon555

Good write-up and photos, especially the side-by-side with your Kimber.
 
Fantastic, thanks for the review. I've been thinking about getting a Coonan for a long time. But now that Smith & Wesson has come out with the 327 (snub nose .357 with an 8 shot cylinder) I might go that direction.
 
Now it's time to order a bunch of bullets.....I've got a few odd lots of bullets to load up then I'll need to come up with a standard load. I'm thinking that 125 grain bullets might be the cats meow for this thing. Not only will the round be moving along pretty well but it will also put on a great light show....and I won't need to worry about flame cutting a top strap like I do on my GP100.
 
I've handled a Coonan and I found it to be a very fine piece of machinery. If I was interested in sticking to the 357 cartridge and not expanding outward, it would be very tempting. However, when looking at ballistics, I decided I was interested in the 10mm, since it mirrored properly loaded 357 ammo.

I find the 10mm a better fit for me, but that doesn't mean I wouldn't love a Coonan. It would sit like a red headed step child next to my other 357's........................... but a very well fed step child.

Some day.
 
Considering the fact that the 10mm mirrors the performance of the 357 in a smaller package it certainly is a lot more practical.....That fact alone should steer most folks towards the 10.....but my brother already has a 10mm and I wanted to one up him....lol He's the one that turned me on to the Coonan. In my case it's more about uniqueness and less about practicality if that makes any sense.
 
but my brother already has a 10mm and I wanted to one up him....lol He's the one that turned me on to the Coonan. In my case it's more about uniqueness and less about practicality if that makes any sense.
HA! Nice.

Yes it does make perfect sense. Unique or unusual guns are very appealing to me too, and for that reason alone, I'd like to own a Coonan. For instance, I really want a Kriss Vector Carbine chambered in 10mm. Like I said, some day.
 
I've handled a Coonan and I found it to be a very fine piece of machinery. If I was interested in sticking to the 357 cartridge and not expanding outward, it would be very tempting. However, when looking at ballistics, I decided I was interested in the 10mm, since it mirrored properly loaded 357 ammo.

I find the 10mm a better fit for me, but that doesn't mean I wouldn't love a Coonan. It would sit like a red headed step child next to my other 357's........................... but a very well fed step child.

Some day.

Coonan also makes a 10 mm.

I have one of the original Coonan 357 Magnums. It’s a great pistol without much recoil.

I reload for mine, using 125 Gr JHPs. Only problem is chasing after my brass.

The grip is longer and thicker than a 1911, though. Mainly because the 357 Magnum cartridge is taller than 45 ACP as you would imagine. The magazines are stainless steel and longer in the anteroposterior dimension.

Though the smooth wood grips are good, I got some thin G10 grips with a star pattern like a Wilson. Much better grip for control. I had to change the bushings which were tricky. I had stripped out the threads of the old bushings. Thinking I just made a $1700 paperweight, I found a video on YouTube on how to remove the stripped bushings. I used a Torx drill bit to fit into the hole of the bushing, and unscrewed it. I replaced it with thinner bushings to use my new grips.
 
No need to worry about Hi-jacking.....The Coonan is a very interesting weapon....whether it be a 357, 10mm or 45....the quality is right up there with some of the better manufacturers.
 
Thanks for the report and great photos—I didn't realize how much bigger the Coonan is. That Kimber Eclipse is one of the nicest-looking 1911s around, too, if you ask me.
 
Well...if I did my ciphering' right, the .357 Magnum's case (1.29") is a just a teeny-tiny bit longer than the 10mm Magnum’s (1.255"). rolleyes.gif

If Coonan really wants to make a statement, they should chamber their new pistol in 10mm Magnum; I mean, it ain't like they don't already gots a frame big enough to do so...

Btw: I did email this suggestion to them.

Sam
 
Last edited:
Status
Not open for further replies.
Back
Top