Harbor Freight sells two different sizes of walnut media, coarse and fine grit.
12 grit coarse walnut media will get stuck in the flash hole -
https://www.harborfreight.com/25-lbs-coarse-grade-walnut-shell-blast-media-92150.html
24 grit fine walnut media won't get stuck in the flash hole and what I use -
https://www.harborfreight.com/25-lbs-fine-grade-walnut-shell-blast-media-92155.html
Nice. It's a great powder measure with standard die thread so I use it on Dillon and Lee presses and actually metering better than the Redding powder measure I have -
https://www.thehighroad.org/index.php?threads/c-h-502-micrometer-powder-measure-10-drops.834894/
After 28 years of marriage, apparently not how to keep my wife happy ...
I can stick/MIG weld OK (After college, I got welding certified at adult school taught by NASA contract welder who did micro welding in vacuum ... At graduation, he demonstrated welding of stainless steel razor blades and aluminum soda can cut in half
) but never got to TIG weld. But I have two aluminum salt water fishing boats so I may get multi-process welder to TIG weld for retirement (Need to weld kicker motor mount for the jet boat and need to weld transom for the outboard boat).
Growing up, family built custom homes for generations and grandparents ran a cabinet shop (After college, to pay homage to family tradition, my sister and I took 2 year Building Trades program where an entire house was built on site by students during the 2 year period). So I have been rehabing/remodeling houses after work during adult/marriage years (Recently built wife
24'x8' chicken house and currently building 12'x6' chicken tractor) but never got to do any cabinet making and planning to give it a try making all the cabinets when we remodel our master bathroom of retirement property (Will double the size with separate shower/tub with clear glass walls and his/her sinks/cabinets) but
I am going to cheat by using the Kreg tool.
I shot USPSA matches and when I climbed to 20 percentile of open division shooters shooting limited 40S&W, I was invited by regional match shooters to try 3-gun match shooting (This was early 2000s). While I was interested, another job assignment moved the family to a part of state where there was no shooting range/USPSA matches nearby and we retired in the same location after doing 3 separate job assignments here. I thought about shooting matches again after I retired in 2019 (Especially after cataract surgery, getting Vivity IOL implants with 100% light transmission and now have 20/20 vision) but nearest USPSA match is 2 hours away over the mountains (And mountain pass closes over winter snow).
Never got to do Ransom Rest testing (I don't know why I never bought one since I have done so many load testing for THR H&R/myth busting threads) but finally getting to weld a machine rest for pistol/rifle/22LR to hard mount to 1000 lb welded landscape trailer with tripod as the base (two rear RV stabilizing feet and front jack mount to lift the trailer) ... just got done fabricating the rear used expanded metal ramp gate welded to the trailer which is going to be my retirement mobile reloading/shooting/accuracy test platform, especially for the rainy winter season with full rain cover, 4 sided enclosure and propane Mr. heater for comfort.