Crosman parts expensive and shipping cost high on ebay
used whatever I got
used a Crosman 1077 12 shot spare cylinder mag clip .177 caliber on a 4 inch steel barrel Crosman 357
cylinder plate missing indexing tab, converted gun to single shot single load using a Ryobi 1/2 inch stick hot-melt glue gun
plastic cylinder mag was mounted on pin and filled with hot melt glue and also filled with glue on the outside 3 shot openings on each side
cylinder was centered with barrel using .176 drill bit
got gun from Craigslist for $25 bucks, must have been in the garage for 30 years or more , inner frame surfaces all corroded
now it shoots with authority with cartridge seal repaired with Pro Seal RTV and flat rubber faucet washer and barrel latch repaired with Golde N rod
did'nt have to spend over $40 of original parts to fix it
bought 500 ct supply of .177 pellets from Walmart @ $3.68 tin of 250 at store counter
used whatever I got
used a Crosman 1077 12 shot spare cylinder mag clip .177 caliber on a 4 inch steel barrel Crosman 357
cylinder plate missing indexing tab, converted gun to single shot single load using a Ryobi 1/2 inch stick hot-melt glue gun
plastic cylinder mag was mounted on pin and filled with hot melt glue and also filled with glue on the outside 3 shot openings on each side
cylinder was centered with barrel using .176 drill bit
got gun from Craigslist for $25 bucks, must have been in the garage for 30 years or more , inner frame surfaces all corroded
now it shoots with authority with cartridge seal repaired with Pro Seal RTV and flat rubber faucet washer and barrel latch repaired with Golde N rod
did'nt have to spend over $40 of original parts to fix it
bought 500 ct supply of .177 pellets from Walmart @ $3.68 tin of 250 at store counter