CZ with factory oversized safety lever?

Status
Not open for further replies.

TheProf

Member
Joined
Jul 1, 2009
Messages
723
Hey guys....

Enjoying the compact CZ 75. I would Iike to carry it cocked and locked. However, the safety lever is a bit small.

Is there a CZ that comes from the factory with a bigger safety lever (similar to a 1911 set up)? (I'm only familiar with the compact versions.)

I know that there's a p01...where you can swap the decocker to a safety. (But are they also the itty bitty versions?)

I would rather not have to install an after market component. Like to keep it all factory parts.

Thanks.
 
Hey guys....

Enjoying the compact CZ 75. I would Iike to carry it cocked and locked. However, the safety lever is a bit small.

Is there a CZ that comes from the factory with a bigger safety lever (similar to a 1911 set up)? (I'm only familiar with the compact versions.)

I know that there's a p01...where you can swap the decocker to a safety. (But are they also the itty bitty versions?)

I would rather not have to install an after market component. Like to keep it all factory parts.

Thanks.

You can get the safety lever from the Shadow SP01 and 75 SAO. It is a factory part which will fit in your 75B

https://cajungunworks.com/product/shadow-extended-manual-safety-lh-side-only/

ybfyUaM.jpg
 
The P-01 thatyou are talking about is the Omega trigger system. None of those parts will swap with the CZ compact.
 
Does the cz pO1 Omega model come with an oversized safety? I know that it allows you to switch from safety lever to decocker.

I'm interested in getting one only if it comes with a larger safety lever than the CZ compact.
 
Status
Not open for further replies.
Back
Top