Dardas Cast Bullets 9MM 126 Grain Semi-Wadcutter

[dardascastbullets]

Hi to all!

We are now manufacturing 9mm 126 grain semi-wadcutter flat base cast bullets! They are available in sized diameters from 0.356" to 0.358". We have them listed on our website. I had this bullet designed for those IPSC and PPC competitors that have been requesting a great semi-wadcutter design that had some 'heft', and a sharp shoulder that would cut clean holes in targets. Enjoy!

 

[john16443]

Another SWC choice for 9mm, that's always welcome.

Matt - a few questions on this bullet.

Overall length of bullet?

Length of bullet body?

Do you suggest seating them like any other SWC style, namely with a good thumbnail thickness of the body above the top of the case? They seem to have a noticeably longer body than your 124gr RN offering with a shoulder.

 

[Certaindeaf]

That looks like a sweet bullet. I always hated the old and "standard" truncated 120gr Lyman type.. mainly been using SWC's in 9 for decades.

 

[dardascastbullets]

Hi John,


The overall length is 0.652" and the 'body' length is 0.330". Seating them is really dependent on what the firearm likes. Anywhere between the top of the lubrication groove and the shoulder is going to be the finished seating area (so to speak).

 

[wankerjake]

Seems like these would double as a good 38spl bullet (sized .358"). I have a couple fixed sight revolvers that shoot high with 158gr bullets. I may have to give these a try.

 

[918v]

BHN please.

 

[wankerjake]

We use certified 92-2-6 alloy which has a BHN of 16

From the website.