Dardas Cast Bullets 45-180gr Flat Base SWC!

[dardascastbullets]

We have added the 45 Caliber 180 Grain Flat Base Semi Wadcutter to our line and are ready to fill orders for this remarkable bullet!

 

[TonyT]

Your website does not provide access to cost or bullets available - what am I doing wrong?

 

[john16443]

That's going on my purchase list Matt.

Here's a link to the page that shows the pricing. http://www.dardascastbullets.com/mm5/merchant.mvc?Screen=CTGY&Store_Code=dardas&Category_Code=45SWC

 

[Striker Fired]

They have 155gr 40S&W bullets sized to .403!!! My two Beretta barrels are oversize and I've been looking(and no success till now) for anybody that makes bigger 40cal bullets. I had to order them.

 

[dardascastbullets]

We do not size to just one diameter - rather we size to what the customer specifies according to the slugged diameter of the groove (and/or the cylinder throats). Your .403" specified diameter is just as important to us as a 0.401" or 0.402" diameter.

 

[Striker Fired]

I have several boxes of 40cal lead bullets that I have tried with limited success,man I wish I had seen these guys before.I called probably 6 to 8 bullet mfgs and they all said they couldn't help me with the .403's.I now have a LOT of .401 bullets and only my XDM that can shoot them good(but it"s tight throat hates lead).I'll be seeing about selling mine localy so I can get a stash of the .403's