Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
You are using the old Black Responsive theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.
Had a piece trash in my 243 die and dented a few case necks before I caught it and cleaned out the die. Scrap or shoot? I've heard both opinions on case necks.
those dents will come out when you shoot them just like fire forming .some times that will happen if you are lubing the neck and shoulder of the case.
CC
I use LEE resizing lube sparingly from the shoulder down with a light swab on the inside with a "q" tip it works well and has no effect on the powder. After I clean with a towel this works for me.
CC
TenDriver,
I thoroughly clean dies with Hoppe's #9 and a cotton 28 ga. bore mop then dry with a cotton cloth after blowing the relief vent hole clear with compressed air.
For case lube, a very thin application of Imperial Sizing Wax will slick 'em up and you'll not stick the case in the die. It wipes off cleanly. too.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.