Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Devcon products

Discussion in 'Rifle Country' started by muffo, Sep 1, 2009.

Thread Status:
Not open for further replies.
  1. muffo

    muffo Member

    Joined:
    May 16, 2009
    Messages:
    38
    where would i go to find devcon products. baring in mind im in Australia
     
  2. muffo

    muffo Member

    Joined:
    May 16, 2009
    Messages:
    38
    Oh and also where would i go to get a release agent
     
  3. mp510

    mp510 Member

    Joined:
    Feb 13, 2006
    Messages:
    3,045
    Location:
    PRKt
    Local hardware store.
     
  4. muffo

    muffo Member

    Joined:
    May 16, 2009
    Messages:
    38
    I went to all the local hardware places but no luck
     
  5. berettashotgun

    berettashotgun Member

    Joined:
    May 8, 2005
    Messages:
    1,149
    The stuff is very similar to "HYSOL" brand 934BA or 917BA or "REN" 2 part paste. (or "J-B Weld".:cool:)
    Your friendly local airport or aircraft annual shop will be a ready source.
    I personally prefer HYSOL brand 934 BA ( part "A" and part "B") I don't know why it is called "BA" at the end of the part number. It will replace DEVCON or REN for most potting applications; with a plus - it flows excellent with a heat gun.
    I do know it (DEVCON) works well on USAF planes on leading edges, I just almost REFUSE to use it - I prefer actual sheetmetal repairs to aerospace "bondo"

    Simple paste wax applied to any surface you don't want it to stick to, or some teflon spray as a mold release.
     
  6. tango2echo

    tango2echo Member

    Joined:
    Dec 14, 2008
    Messages:
    811
    Kiwi shoe polish in "neutral" is the best release agent. Devcon 10110 can be ordered online and shipped if not available local.

    t2e
     
  7. muffo

    muffo Member

    Joined:
    May 16, 2009
    Messages:
    38
  8. muffo

    muffo Member

    Joined:
    May 16, 2009
    Messages:
    38
    bump
     
  9. berettashotgun

    berettashotgun Member

    Joined:
    May 8, 2005
    Messages:
    1,149
    For bedding a barrel - I'd say yes.
     
Thread Status:
Not open for further replies.

Share This Page