So I have issues from time to time with the primer bar sticking.
My 450 machine is second hand and has a very well used past.
Looking at the bar the primer pin and retaining cup sleeve sets above the bar and the bar does not make contact anywhere else.
I lubed the side and bottom of bar with 3 in 1 oil and loaded 500 45 acp issue free.
Is there a contamination possibility doing this?
I use brake cleaner to clean primer punch and retaining sleeve each time I load.
I know primer dust/ debris could be an issue if not cleaned from machine in a oil paste
My 450 machine is second hand and has a very well used past.
Looking at the bar the primer pin and retaining cup sleeve sets above the bar and the bar does not make contact anywhere else.
I lubed the side and bottom of bar with 3 in 1 oil and loaded 500 45 acp issue free.
Is there a contamination possibility doing this?
I use brake cleaner to clean primer punch and retaining sleeve each time I load.
I know primer dust/ debris could be an issue if not cleaned from machine in a oil paste