Dillon Backorder Thread

Status
Not open for further replies.
Got my die set for. 40 cal. Ordered on march 16 just waiting on 550 now.

Sent from my DROIDX using Tapatalk 2
 
Finally got the last part of my order that I placed in Febuary. The super swage 600. Man that took forever.
 
Still waiting on my .40/10/357 sig conversion and tool heads that I ordered on 4/12. A bunch of eBay funds for my Hornady press cleared my PayPal, so today I ordered the .44 Mag/Spcl. Conversion and enough tool heads and stands to cover most of the rest of my needs.

I'm also considering adding a dedicated powder despenser to my common calibers, so I added one for my .38 special tool head. I also added a few of the powder check kits that Brian Enos sells to get my order up above the $400 free shipping mark.

Once this order (and the last one) shows up, I should be pretty well complete for what I currently load.
 
On 3/15/13 I ordered 45acp dies,45acp cal- conversion, toolhead with stand and powder measurer. On 5/03/13 I received the rest of my order. I think things are getting better.
 
Ordered a 1050 .308 caliber conversion form dillon and grafs. Hoping it doesn't take to long.

I ordered a RF100 primer filler form grafs on back order and it surprised me and came in a week.
 
How much did you get for your hornady press? I am thinking about throwing mine up on ebay.
 
I sold the Hornady press (minus the powder dispenser...I'm still using that) , along with an inline fabrication ergo roller handle and strong mount, and a Lee auto disk for for just north of $400 on one of the forums.

The bullet feeder I sold separately on ebay...I forget how much, but it was nearly new, so like $50 under retail.

The bushings I sold $5.00 each plush shipping ($2.50 for 1, 50¢ each additional).

The bullet feeder dies went to another forum member for something like $50

The shell plates I put on ebay. Some sold near what I paid, some shot through the roof, and some sold below what I hoped.

The case feeder had some issues from the factory that were fine for me, but probably wouldn't be fine for a prospective buyer, so that is currently being replaced by Hornady, and when I get it back I will probably put it up for sale on the forums or eBay for a fair price.

It all sold fairly quickly, and at prices that were agreeable to all parties. I was able to leverage the high demand to lessen hit I was taking by selling it without needing to gouge anybody.
 
Just received my order from 4/11. 40S&W/10mm conversion kit. Now I'm all set for 40S&W, 10mm, and 357 Sig. Also 3 tool heads and 3 stands.
 
Received email today that .40 cal dies that were ordered on 3/9 finally shipped.
Got the 550B (ordered 3/9) last week. Only thing I'm still waiting to ship is strong mount.


Greg
 
My 44 mag caliber conversion tht I ordered 5/4 along with a bunch of tool heads, stands, powder measure, and powder check dies still has not shown up. I had hoped that things would be moving along by now, but the back order list posted on brianenos.com, from May 23rd shows a different story

Dillon products on backorder: 05.23.13
Product Approximate Return to Stock Date
223 Dies, Steel 3 Months
223 Dies, Carbide 4 - 6 Months
308 Dies, Steel 4 - 5 Months
308 Dies, Carbide 4 - 6 Months

All commonly ordered Dillon products are out of stock.
Approximate ship-times for known items:

Pistol Dies: 4 - 8 weeks
Square Deal Press: 3 - 5 weeks
RL 550B Press: 4 - 8 weeks
XL 650 Press: 6 - 7 weeks
RL 1050B Press: 4 - 8 weeks, depending on caliber. 223 & 308 1050's are 8 - 12 weeks.
Super Swage 600: 8 - 9 weeks
RF 100 Primer Filler: 4 - 6 weeks
RT 1200 Case Trimmer and Trim Dies: 8 - 12 weeks
A few items MAY BE in stock - Case Lube, Rapid Polish, and uncommonly ordered items,
such as a 41 Mag. Caliber Conversion Kit.

NOTE: For any other items, I cannot get return-to-stock dates from Dillon.

I update this page the moment new info becomes available from Dillon.
Click to expand...
 
I ordered a Dillon eliminator scale on June 1 and it was shipped on June 3 received couple days later
 
The stuff I ordered May 4th arrived today. 44 Mag/spcl conversion, powder dispenser, powder die, a bunch of tool heads and stands, and a few powder check dies and powder check rods.
 
Last edited:
XL 650 in 9mm was delivered today. 7 weeks and 1 day after order placed through Brian.

Dies came in 2 weeks before and small accessories came like 1 week after order.
 
Any NE Ohio reloaders looking to get a 550 or a 650, MidWest Gun Club in Canal Fulton has several of each.
 
Here is a promising Dillion update from the Brianenos.com site:


Dillon products on backorder: 06.17.13
Product Approximate Return to Stock Date
223 Dies, Steel 2 - 3 Months
223 Dies, Carbide 2 - 3 Months
308 Dies, Steel 2 - 4 Months
308 Dies, Carbide 2 - 4 Months

Dillon is getting "caught up" on many items. Most items - except Rifle Dies - will ship in approximately 1 - 3 weeks.
Approximate ship-times for known items:

Pistol Dies: 2 - 3 weeks (except 357 Sig Dies, which are 2 - 4 months)
Square Deal Press: 1 week (many calibers are in stock)
RL 550B Press: 2 - 3 weeks
XL 650 Press: 2 - 3 weeks
RL 1050B Press: 5 - 8 weeks, depending on caliber. 223 & 308 1050's are 8 - 12 weeks.
Super Swage 600: 1 - 2 weeks
RF 100 Primer Filler: 4 - 6 weeks
RT 1200 Case Trimmers are in stock, BUT Trim Dies: 8 - 12 weeks
Most Machine Options are all in stock
NOTE: For any other items, I cannot get return-to-stock dates from Dillon.

I update this page the moment new info becomes available from Dillon.
Click to expand...
 
I had to wait about 5 minutes in line at Scheels to pay for my 550B. It was just before lunch so it seemed like a really long time.
 
Status
Not open for further replies.

Similar threads

S
  • Locked
Dillon Dies, Prices and Backordered
2
Replies
34
Views
2K
Soonerpesek
Soonerpesek
L
  • Locked
Carbide Rifle Dies in a Dillon 550B
Replies
11
Views
1K
loadedround
L
A
  • Locked
Dillon RL1100 & Super 1050
2
Replies
25
Views
3K
ddc
D
A
  • Locked
Your advice !!!!
Replies
0
Views
437
alca
A
W
  • Locked
Dillon RL 550 B
Replies
11
Views
670
will_m68
W
Back
Top