Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
You are using the old Black Responsive theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.
I don't think so.
My gunsmith and I looked for a way to get just a Lee CFC die into a SDB and could not come up with a method.
Problem is, the insert dies are smaller diameter than 7/8x14 "Pacific" style dies and there is not room in the small SDB head for anything bigger.
Nope, I am not selling the pro 1000. yesterday I was able to make 78 rounds with no malfunction. I just got 2 reversed cases and my 79th was a flipped primer.
I am just curious about the Square if it is doable.
I am a very patient man. But I can say that after 1 hour and half on that torture machine, I have to go get some fresh...well....In Augusta, there is no fresh air anymore that time of the year.
One little annoying thing I am trying to fix is the flying spent primers. I put a piece of primer box cardboard cut in an odd shape on the right side of the press attached with tape to try to prevent the primers to go away. I did a widget like that but different on my Dillon and I seldom lose a spent primer on the ground now.
No, those 78 rounds took me about 25 minutes max. Remember, I have 4 tubes for the cases and 4 tubes for the bullets.
I put about 150 primers in the primer cup. I found out it does not hurt.
I used EXTENSIVELY my dremmel on the bullet feeder to make it reliable.
Still there is an isssue with the claws not beeing strong enough to "pull out" a bullet from the column when the column is full of bullets.
My trick is really to go counter clockwise 3 times each time I am pulling the lever: check no reversed case, check case leaving #1 is not getting stuck, check a primer is going down the ramp when case goes pass the black plastic thing, put my finger over the case so no powder gets out, check that my claws are pulling with them the bullet.
It is becoming more and more a reflex...in 2-3k rounds done, it will be as natural as looking at the butt of a good looking girl while walking and chewing gum.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.