Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

[Disassembly Question] Charter Arms .38 Off Duty

Discussion in 'Handguns: Revolvers' started by TITAN308, Mar 8, 2012.

Thread Status:
Not open for further replies.
  1. TITAN308

    TITAN308 Member

    Joined:
    Dec 27, 2011
    Messages:
    439
    Location:
    Augusta, GA
    I've gotten this thing broken down all the way minus one pin that is to the right of the trigger guard, right before the handle portion.

    It will not come out.

    Is this by design? I mean it allows me to swing the bottom frame down from the top frame (like a break action) to get to the inside, but was not sure if this pin had been staked from the factory, or if it was intentional.

    [​IMG]
     
  2. AZ_Rebel

    AZ_Rebel Member

    Joined:
    Sep 20, 2007
    Messages:
    482
    Location:
    AJ, AZ
    It will come out. Soak it with Kroil overnight, support the frame and use a Starter Punch. Go from left to right.
     
Thread Status:
Not open for further replies.

Share This Page