sharptailhunter
Member
- Joined
- Apr 19, 2010
- Messages
- 40
I recently loaded my first reloads. I loaded for 30-06 and 300 Savage. The first loads I did before I had a case trimmer. Now I have a Wilson trimmer. I'm trying out different brands of bullets (all 150 gr SP) for now and keeing the powder the same. My concern is that some of the loads for bullet X got loaded with untrimmed cases while the cases for bullet Y have all uniform case lengths.
Bare in mind, these are hunting loads for hunting rifles. I really don't want to pull all the bullets from the untrimmed cases just to trim them and reload em. However, I don't want to write off bullet X because it was less accurate than bullet Y. Can case length affect accuracy enough to toss out what otherwise would have/could have been an accurate load?
Bare in mind, these are hunting loads for hunting rifles. I really don't want to pull all the bullets from the untrimmed cases just to trim them and reload em. However, I don't want to write off bullet X because it was less accurate than bullet Y. Can case length affect accuracy enough to toss out what otherwise would have/could have been an accurate load?