So this was just a test load to see if putting two balls or projectiles into a single chamber would work out in my ROA.The Chambers were deepened by Clements.
The ultimate plan is to use my custom made cast BigLube HP of either 145 gr or 200 gr. Seat it on top of a swaged full wadcutter of whatever weight I like...since you can squeeze them to any weight.
I would use T7 and RWS 1075 caps.
So I tried a crude test. I used a 150 gr BigLube (no HP) over a swaged 150 RB.
I used 25 gr of T7, Plenty of room for more and an RWS 1075.
The recoil was more than I expected and the accuracy? Well, let us hope I find a better recipe. They went no where that I could call usefully accuracy.
The ultimate plan is to use my custom made cast BigLube HP of either 145 gr or 200 gr. Seat it on top of a swaged full wadcutter of whatever weight I like...since you can squeeze them to any weight.
I would use T7 and RWS 1075 caps.
So I tried a crude test. I used a 150 gr BigLube (no HP) over a swaged 150 RB.
I used 25 gr of T7, Plenty of room for more and an RWS 1075.
The recoil was more than I expected and the accuracy? Well, let us hope I find a better recipe. They went no where that I could call usefully accuracy.