Educate me on PCP fill fittings

[3Crows]

I just bought a Gamo Urban (.22) and then I also ordered an Umarex Gauntlet 2 (.25). I also ordered a DIN (supposedly PCP, paint ball) whip. I see that the Gamo came with a fill fitting and I assume the Umarex will also? But I have not received the fill whip yet and I am curious as to what I will need to connect the supplied Gamo fitting male end (and the Umarex fitting) to the fill whip hose?

I SCUBA dive and have many tanks (3,000 and 3,450 psi) and even a (currently broken) compressor so I plan to fill from a SCUBA tank for the time being. I may eventually purchase a PCP electric compressor.

Thanks,
James

 

[jmohme]

The gun end of most fill probes are brand specific, but the end that connects to the air supply is, as far as I know, always a standard Foster fitting.

 

[3Crows]

The gun end of most fill probes are brand specific, but the end that connects to the air supply is, as far as I know, always a standard Foster fitting.

Okay, good to hear then. Hopefully the fill whip and G2 will arrive shortly and I can put it and the Gamo Urban to work pesting pestiferous pests .

My break barrels are just not doing the job accuracy wise and my two modded 392s are just too slow to get a follow up with HOSPs. I am looking forward to a successful blue bird brooding season. And rotator cuff surgery makes cocking or pumping a challenge for the time being. PCP to the rescue .

3C

 

[jmohme]

The Game Urban should serve you well.

 

[3Crows]

This is the fill whip that I bought:

https://www.amazon.com/dp/B07R6LN6T1/ref=cm_sw_r_awdo_navT_a_43G439N68A7YR2MDWA51?th=1

I found lesser expensive A-frame (yoke) whips but I wanted the threaded DIN fitting because my highest pressure SCUBA cylinders are DIN valves. I hope this is good enough to get me going.

The Gamo thus far:



3C