sanchezero
Member
- Joined
- Dec 26, 2002
- Messages
- 555
OK, so I got all my press issues worked out and loaded up about 50 rnds of .45 LRN.
Shot some tonight and had a ton of feed issues. Most of the rounds wouldn't fully chamber. During the setup process I had this same issue and thought I'd fixed it.
I checked the rounds diameter against another 'known feeding round' and set the crimp until they matched. I also did some dry feeds with no problems.
Any ideas what might have happened? Is there another issue that might be causing this not-going-into-battery thing? (BTW, my OAL is OK too )
Thanks guys...
Shot some tonight and had a ton of feed issues. Most of the rounds wouldn't fully chamber. During the setup process I had this same issue and thought I'd fixed it.
I checked the rounds diameter against another 'known feeding round' and set the crimp until they matched. I also did some dry feeds with no problems.
Any ideas what might have happened? Is there another issue that might be causing this not-going-into-battery thing? (BTW, my OAL is OK too )
Thanks guys...