Finally finished my 10/22 project

[UberPhLuBB]

I started with a bare 10/22 4 months ago. I wish I could have built it sooner but I couldn't afford to build it all at once. Oh well, it's done now!

The particulars:
GM blued 18" BBL
Richard's Microfit Tack-Driver Silhouette (electric blue, with extra length)
BSA Contender 6-24x50 scope w/ 4" sun shade
Burris Signature Zee rings on a Weaver TO-9 base
Volquartsen hammer
Volquartsen bolt buffer (urethane)

Home made:
Auto bolt release
Polished guide rod
Extended magazine release
Ruger .22Mag bolt handle
Overtravel screw in trigger guard
Bedded 2" of barrel (up to the first vent in the stock)

I'm going to the range this Thursday (finally) to see how well it does. I'm glad it's over, but disappointed at the same time. I want more to do! It was great fun while it lasted.

 

[landon74]

Nice! I hope it shoots as good as it looks.

 

[esskay]

Indeed, that's a looker!

 

[WhiteKnight]

I like the longer forearm.

 

[ToxicSports]

UberPhLuBB,

How do you like that stock? I fell in love with it the first time I saw it on their website. I was thinking about getting one for my CZ Varmint but wasn't sure what they looked like in the "REAL" world or if they felt as good as they look.

Even though they look like a blaster stock the TD stock seems to have more grip area for larger (fatter) hands like mine.


TS

 

[UberPhLuBB]

If you are patient and know how to finish a stock, I'd say go for it. Richard's doesn't sell finished stocks, so you'll have alot of sanding, staining and/or urethaning to do.

This was my first time finishing a stock and it wasn't too hard (though there is one area I should have sanded just a little better before finishing).

I like the feel better than the "Blaster" type stocks, but you may not. The grip is definately different. There is also the fact that most people use "Blaster" stocks on their 10/22's. They're a dime a dozen, even with modifications to them they are very common. That's one reason I got a Tack-Driver Silhouette, I'd only seen one other. I had them leave on extra length to set myself apart further.

Just be aware that "99% finished" doesn't relate to the work that needs to be done, but the material removed. You will have to sand. Alot. When you think you're done sanding, you're not. If you get one, just make sure you take your time the first time, and be aware that there isn't a single straight surface on the entire stock, so using a block of wood or similar is out (pay attention and preserve the lines and shape of the stock when you sand too, particularly the cheekrest area). You have to do everything by hand. Also, I suggest paying the $25 and having them fit a butt pad for you. Oh man was that a nightmare, I kept sanding and sanding but the rubber portion just absorbed the force of sanding. It took forever. Also, forget about using an orbital sander, it just vibrated the thing and made no progress (a belt sander would probably make short work of it, but you'd have to be careful to match the angle of the stock. I used a sanding block only in this area).

That said, I love mine! If you're inclined towards woodworking, you should enjoy finishing one.

 

[duckslayer]

Good work...that looks pretty cool. I hope it shoots well for you.

 

[Red Tornado]

It looks sweet, but enough teasing. How about a range report? We really need to know.
RT

 

[UberPhLuBB]

Here are a few groups at 60 yards. I didn't shoot any over 1" (subsonic), but I only got one under 1/2". I noticed something interesting. I sighted in at 60 yards with subsonic, and when I switched to supersonic, all the groups moved 2" up and 1" right. I suppose it has to do with rifling, but I wasn't expecting it. All subsonics on the money, and all supersonics 2" high and 1" right.

I'm a bit disappointed, but I guess this means I didn't get off easy and I have more work to do.

I think I'll start by re-bedding the stock and packing some more sand into my benchrest bags. I need a caliper too...

The diamonds are 2" at the inside of the thick black line and the grid lines are 1/4". Excuse the handwriting, the backer board has hundreds of holes in it, it's like writing on your thigh.


(Yes I know I misspelled Eley and forgot to put Club Xtra)

 

[NEtracker]

That rifle looks great! Nice job.

 

[MiniZ]

Great Job! Now, does anyone really ever "finish" one of these? I'm always tweaking my 10/22s, making an adjustment here, changing a part there....