Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
You are using the old Black Responsive theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.
Problem:
AGP 10rd Saiga mags feed birdshot fine, but buckshot shells seem to bind and not be pushed up out of the mag quickly enough, or not at all.
Examination:
Some buckshot has a higher brass base, which binds at a very specific point in the magazine. See attached photos. The yellow arrow shows the location high brass base shells like 3" buckshot bind.
Solution:
Remove feed lips. Hold follower down with thumb. Take medium grit sandpaper and with moderate pressure take 40 swipes on each side at the yellow arrow to remove all mold flash, burrs, and take about 15 thousandths off. Take 600 grit paper and do another 40 swipes to smooth it out. Put feed lips back on. Done.
Note: This problem also occurs with Russian magazines, but not as bad. The yellow arrow points to the spot where dirt will build up and bind the magazine.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.