Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Freshly finsihed all steel Tomahawk

Discussion in 'Non-Firearm Weapons' started by Harlan, Jul 31, 2008.

Thread Status:
Not open for further replies.
  1. Harlan

    Harlan Member

    Joined:
    Jul 31, 2008
    Messages:
    33
    Location:
    Portland, OR
    New to the forum. My name is Harlan Whitman. I want to be a knife maker when I grow up. Maybe I should be less concerned about growing up and pay more attention to making knives hmmmm...
    Anywho thought it best to kick it off with the latest creation.

    Inspired by cartoon tomahawks, and old military gear. :scrutiny:

    Criticism welcome! :eek:
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Thanks for lookin!
     
  2. Otony

    Otony Member

    Joined:
    Jan 19, 2003
    Messages:
    500
    Location:
    Pacific Northwest, on the Dry Side
    I like it Harlan!

    What kind of steel is it, and how thick is the stock? How did you heat treat it.

    Are you actually a "yute" or are you having fun with us? :D
     
  3. LB7_Driver

    LB7_Driver Member

    Joined:
    Jan 4, 2008
    Messages:
    107
    Details man, DETAILS!


    Looks nice. How does it work?
     
  4. Valkman

    Valkman Member

    Joined:
    Jul 31, 2003
    Messages:
    6,585
    Location:
    North Las Vegas, NV
    Looks good and welcome! It took a big hunk of steel to make that!
     
  5. Harlan

    Harlan Member

    Joined:
    Jul 31, 2008
    Messages:
    33
    Location:
    Portland, OR
    13" OAL
    Blade Thickness - .25"
    Cutting Edge - 3.5"
    Handle Length - 6.5"
    Steel - 154CM also available in 01 and S7 or whatever you want
    O.D. G10 scales
    Brass fasteners

    The 2x4 absolutely hated this thing let me tell you...
    so far chopping through a 2x4 is the only use it has seen. It did great though with that sharp long flat grind cut like a dream.


    It was heat treated at 1900 degrees oil quenched, double tempered at 400 degrees, followed with a cryogenic quench.

    Thanks for making me have to look up yute!!! Hahaha still not sure what it mean something about an onion in that case yeah I guess so ;)
     
  6. JShirley

    JShirley Administrator Staff Member

    Joined:
    Dec 20, 2002
    Messages:
    20,843
    Location:
    Atlanta
    Harlan, welcome to the forum.

    That's a good lookin' hawk, there.

    John
     
  7. soccergod04

    soccergod04 Member

    Joined:
    Jan 30, 2008
    Messages:
    117
    Location:
    Raleigh, NC
    That's a good lookin hawk. Are you on Bladeforums, too?
     
  8. John G

    John G Member

    Joined:
    Dec 24, 2002
    Messages:
    566
    Location:
    Western NY
    Nice chopper. Looks like a serious brute.
     
  9. Otony

    Otony Member

    Joined:
    Jan 19, 2003
    Messages:
    500
    Location:
    Pacific Northwest, on the Dry Side
    "yute" = youth

    It was a reference to your age, but if you want to be an onion, well.......

    Nice job!
     
    Last edited: Aug 1, 2008
  10. Harlan

    Harlan Member

    Joined:
    Jul 31, 2008
    Messages:
    33
    Location:
    Portland, OR
    Thanks everyone for the kind words. Very much appreciated!

    Soccergod04
    Yep on the Bladeforums a.k.a knghtwalkr

    Otony
    Ohhhhh... as for my youth I'm 24 which to me is a baby in the knife making world. Constantly being remimded I don't know that much at all.
     
  11. Dionysusigma

    Dionysusigma Member

    Joined:
    Mar 27, 2003
    Messages:
    3,671
    Location:
    Okay City
    [​IMG]

    "... like the time I caught the ferry over to Shelbyville. I needed a new heel for my shoe, so, I decided to go to Morganville, which is what they called Shelbyville in those days. So I tied an onion to my belt, which was the style at the time. Now, to take the ferry cost a nickel, and in those days, nickels had pictures of bumblebees on 'em. Give me five bees for a quarter, you’d say. Now where were we? Oh yeah -- the important thing was that I had an onion on my belt, which was the style at the time. They didn’t have white onions because of the war. The only thing you could get was those big yellow ones..."
     
  12. wheelgunslinger

    wheelgunslinger Member

    Joined:
    Jan 2, 2005
    Messages:
    2,439
    Location:
    0 hours west of NC
    LOL! I love Abe Simpson!

    Nice Hawk Harlan!
     
  13. TimboKhan

    TimboKhan Moderator

    Joined:
    Apr 15, 2005
    Messages:
    8,047
    Location:
    Greeley, CO
    I like it! It's different without being goofy, which I like. I can honestly say that is one of the best looking "modern" tomahawks I have ever seen.
     
  14. Thernlund

    Thernlund Member

    Joined:
    Apr 12, 2007
    Messages:
    2,347
    Location:
    Phoenix, AZ
    Nice tomahawk!!


    -T.
     
  15. hso

    hso Moderator Staff Member

    Joined:
    Jan 3, 2003
    Messages:
    47,612
    Location:
    0 hrs east of TN
    Harlan,

    First, welcome to THR.

    Second, you must not know very many knife makers if you think they're very grown up. ;)

    Third, good looking modern Hawk!

    Why'd you pick 154-CM for a small ax? I assume you didn't through harden it so how'd you quench it?
     
  16. Don Gwinn

    Don Gwinn Moderator Emeritus

    Joined:
    Dec 21, 2002
    Messages:
    6,385
    Location:
    Virden, IL
    It does remind me of something out of anime. I like it. It looks like it would be fairly balanced, not a lot of bias toward the head, with that tang. What's the balance like?

    Now that I think of it, does it really matter, as long as the weight is that far forward?
     
  17. loandr.

    loandr. Member

    Joined:
    Aug 12, 2003
    Messages:
    373
    Location:
    Ocala, Florida 34482
    that is a beast sir, great work, may I ask what the approx. weight is please?

    Russ
     
  18. Harlan

    Harlan Member

    Joined:
    Jul 31, 2008
    Messages:
    33
    Location:
    Portland, OR
    HSO - So the 154cm is due to requests for a stainless hawk. I normally use 01 or 5160 and if insisted upon stainless I used 440c, but being curious I wanted to try the 154cm.

    In your opinion what would you have used? I would like to know.

    quenched edge first untill flames stopped pulled out, put back in held tell smoke started to reside then rolled it along the top and around to the back slowly.

    I tested a few failed a few and this seems to be working for me. The last one made like this was even bigger and has taken a seriously brutal testing and survived.

    Don Gwinn - This is a shape that through testing with many pieces of acrylic and plywood I have come to really like due to the balance. The head weight seems to do a lot of the work for you when chopping, and the angle of the handle keeps the control very well. I feel like out of all my designs this is one of the ones that I would want to take into combat. Balance has a lot to do with preference in my opinion. This axe shape normally gets a good "oh yeah" when somone picks it up and start swinging it around.

    As for the overall weight I'll have to get back to ya. No scale just moved to Portland and had to leave behind so many tools in Missouri:(

    Again thanks for all your comments!!!
     
  19. Harlan

    Harlan Member

    Joined:
    Jul 31, 2008
    Messages:
    33
    Location:
    Portland, OR
    Weight is 771 grams 1.7 lbs.

    Finally got hold of a scale.
     
Thread Status:
Not open for further replies.

Share This Page