Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

glock 30 sf

Discussion in 'Handguns: Autoloaders' started by Robbins290, Jul 29, 2012.

Thread Status:
Not open for further replies.
  1. Robbins290

    Robbins290 Member

    Joined:
    May 8, 2011
    Messages:
    1,252
    Location:
    Limerick, maine
    i have a glock 30sf. im looking for a conversion barrel in 10mm. all i can find is g30 barrel. will the standard 30 barrels fit in the sf? i dont know alot about the glocks. would i need a extractor and recoil spring to help with the differnce's in pressures and case sizes?
     
  2. hentown

    hentown Member

    Joined:
    May 13, 2012
    Messages:
    1,742
    Uppers are the same; only the frame is different. You'll need a stronger recoil spring and a lot of luck. Good luck with reliable extraction. :cool:
     
  3. Robbins290

    Robbins290 Member

    Joined:
    May 8, 2011
    Messages:
    1,252
    Location:
    Limerick, maine
    thanks hentown, i already decided not to trust my life with the conversion barrel. going to use the 10mm as a side arm out in the field.
     
  4. hentown

    hentown Member

    Joined:
    May 13, 2012
    Messages:
    1,742
    You might find that the conversion barrel is 100%. Some have reported that's their experience. Others, however, report unpredictable extraction problems. There are some recommended "fixes" to the .45ACP extractor, to make it work better with 10mm.
     
Thread Status:
Not open for further replies.

Share This Page