I think me need some help with a issue, Today while at the range with a buddy of mine I let him shoot a few rds. from my H&R single shot 300 blackout. Somehow he got a live round stuck in the barrel and the brass must be soft or something caused the ejector to jump or slip or something there is a live round stuck in the breech I took a wooden dowel and tried to tap out the round but its stuck to tight for that to happen, I see no reason for it to be stuck that tight.. any suggestion s appreciated. :banghead:
H&R 300 blkout Bullet stuck in barrel
- Thread starter matheneyg
- Start date
- Status
I think me need some help with a issue, Today while at the range with a buddy of mine I let him shoot a few rds. from my H&R single shot 300 blackout. Somehow he got a live round stuck in the barrel and the brass must be soft or something caused the ejector to jump or slip or something there is a live round stuck in the breech I took a wooden dowel and tried to tap out the round but its stuck to tight for that to happen, I see no reason for it to be stuck that tight.. any suggestion s appreciated. :banghead:Don't use a wooden dowel it could splinter and get jammed around the bullet. Try pouring a penetrating oil down the barrel. Let it sit a few hours put the barrel in a vice and tie a string around the rim and see if you can yank it out
rcmodel
Member in memoriam
Go buy a brass rod at any hardware store.
Then drop it down the barrel.
The weight will knock the stuck case out.
And NEVER use a wood dowel on a pointed bullet!!!!!
If the end splits (which it will) and wedges tightly around the bullet tip into the bore?
You have created the Mother of All Barrel Obstructions!!!
rc
Then drop it down the barrel.
The weight will knock the stuck case out.
And NEVER use a wood dowel on a pointed bullet!!!!!
If the end splits (which it will) and wedges tightly around the bullet tip into the bore?
You have created the Mother of All Barrel Obstructions!!!
rc
- Status
