Hard Cast 45ACP bullets

[Yo2slick]

Hey guys, I bought some lead 45acp bullets yesterday and made a couple dummy rounds and everything chambered beautifully. I then measured the bullets and I am showing .453 diameter. Will this be ok or a tiny bit to large. I am under the impression that 45acp are usually .451-.452 so before I tried it I thought I would ask the experts. These are 230gr LRN bullets. Thanks everyone!

 

[rcmodel]

No problem if they will fit in the chamber.

rc

 

[Yo2slick]

Thanks a bunch RC!!! Ill load some up and go try them.

 

[bullseye308]

Lead bullets are usually .001 over jacketed.

 

[putteral]

If they chamber you should have no problems.