Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

HELP!!! Arminius Tiger titan .38 special

Discussion in 'Handguns: Revolvers' started by baddad, Jan 30, 2011.

Thread Status:
Not open for further replies.
  1. baddad

    baddad Member

    Joined:
    Jan 30, 2011
    Messages:
    6
    I recieved this from my Brother someone had disassembled and didnt put back together right the gun will shoot but the chamber wont turn the pawl wasnt put back in correct I need an exploded diagram. I have searched for days on the internet. cant find anything. it has a 6" barrell I think it is the Hw 38 Titan Tiger .38 special.

    Thanks for the help.
     
  2. TheGent

    TheGent Member

    Joined:
    Jul 28, 2010
    Messages:
    39
    An exploded diagram of the EAA Windicator will work. It is essentially the same gun. The only thing that changed was some of the cosmetics on the exterior of the gun. The EAA Windicator was the FIE Arminius Titan Tiger. I have had both and have taken them both apart. There are subtle differences of which I cannot remember, but you should be able to build it from that.

    Here's the manual:
    http://www.eaacorp.com/Manuals/windicator.pdf
     
  3. baddad

    baddad Member

    Joined:
    Jan 30, 2011
    Messages:
    6
    here is what it looks like the one in the link is close but not right thanks for the help and quick response.
     

    Attached Files:

  4. TheGent

    TheGent Member

    Joined:
    Jul 28, 2010
    Messages:
    39
    Scroll through the manual and look at the exploded diagram. The diagram used in the manual for the EAA Windicator still shows the old Titan Tiger with 4" barrel exploded view, which is the exact same gun in your pic. Outwardly the guns are different (Barrel sizes, Grip, Hammer Spur, etc.), but internally your gun is the same as the EAA Windicator. They are still made in Germany by the same company. They are just imported by two different importers. Arminius Titan Tiger = FIE while Windicator = EAA.
     
  5. baddad

    baddad Member

    Joined:
    Jan 30, 2011
    Messages:
    6
    ok thanks what Im looking for is how the chamber is turned ????

    im a knife maker not much on guns I seem to be missing that part.
     
  6. baddad

    baddad Member

    Joined:
    Jan 30, 2011
    Messages:
    6
    This is the other side......
     

    Attached Files:

  7. baddad

    baddad Member

    Joined:
    Jan 30, 2011
    Messages:
    6
    lookslike #12 the hand.....
     
  8. baddad

    baddad Member

    Joined:
    Jan 30, 2011
    Messages:
    6
    Big Thanks for the help recieved th part installed and got to shoot it this weekend shoots real good thanks again..
     
Thread Status:
Not open for further replies.

Share This Page