So curiosity got the best of me, and I decided to take off the side-plate of my Model 36. I know nothing about revolvers and wanted to see how this thing works (I also feel better about my guns knowing how they function and wanted to make sure there was no damage inside, b/c I recently bought this used.)
Well first, as soon as I poppped of the side plate the hammer block fell out. Luckily, I found a schematic online and figured out the proper positioning for reassembly (unless this is wrong). I then cleaned and lubed the internals.
Now the problem- I can't seem to get the side plate back on. I don't think it was ever dissassembled in the past 45 years of its life and the front part of the plate doesn't want to fit. Nothing appears broke or damaged and I want to keep it that way. Are there any tricks or suggestions you guys can offer?
Thanks in advance from the newb!
Well first, as soon as I poppped of the side plate the hammer block fell out. Luckily, I found a schematic online and figured out the proper positioning for reassembly (unless this is wrong). I then cleaned and lubed the internals.
Now the problem- I can't seem to get the side plate back on. I don't think it was ever dissassembled in the past 45 years of its life and the front part of the plate doesn't want to fit. Nothing appears broke or damaged and I want to keep it that way. Are there any tricks or suggestions you guys can offer?
Thanks in advance from the newb!
Last edited: