Little Red
Member
I got one second hand and it had a few modifications such as a ASM replacement barrel. Not a good idea as it required some mods to the rest of the firearm to get it to a"work" condition place. I got a new replacement barrel and it fits much better then the ASM, head space is nearly non existent. However, he filed down the Uberti arbor since the ASM arbor hole is smaller then the uberti, now the uberti is still able to be tightly mounted, with a loose barrel before the wedge is installed I suspect accuracy will suffer. A new arbor is cheap enough but I am not sure how to remove it from the Walker. I did it to a brass frame 44 1851 replica, but this set up is a little different. Any Walker experts out there that can get me going in the right direction? Thanks, John/Red
Let me hazard a guess. On the 1851 replica the arbor screwed in and a pin came from above and locked it in place. On the walker the pin mounts from the back straight in to the arbor. I think you screw the arbor in and out once the pin has been drilled out and to lock the arbor back in place another pin would have to be inserted, correct?
Let me hazard a guess. On the 1851 replica the arbor screwed in and a pin came from above and locked it in place. On the walker the pin mounts from the back straight in to the arbor. I think you screw the arbor in and out once the pin has been drilled out and to lock the arbor back in place another pin would have to be inserted, correct?
Last edited: