floydster
Member
When I designed this project it had to meet four criteria.
It had to cost lees rthe $20:
It had to be simple to build:
It had to be accurate:
It had to be easy to adjust:
My main concern was not an under charge, I can watch the plunger on the powder check for that, and now when I see powder it the case I know it is not an over charge or a double charge. It is very difficult to detect a OC or DC in a 45 ACP case when using 231, tightgroup or Bullseye.
I can adjust the check down to detect 2/10 gr. overcharge.
All elec. components are from Radio Shack.
Other components are from the hardware store.
Floydster
It had to cost lees rthe $20:
It had to be simple to build:
It had to be accurate:
It had to be easy to adjust:
My main concern was not an under charge, I can watch the plunger on the powder check for that, and now when I see powder it the case I know it is not an over charge or a double charge. It is very difficult to detect a OC or DC in a 45 ACP case when using 231, tightgroup or Bullseye.
I can adjust the check down to detect 2/10 gr. overcharge.
All elec. components are from Radio Shack.
Other components are from the hardware store.
Floydster