Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Hornady manual 300wsm question

Discussion in 'Handloading and Reloading' started by K-Dirt, Nov 15, 2008.

Thread Status:
Not open for further replies.
  1. K-Dirt

    K-Dirt Member

    Joined:
    Nov 8, 2008
    Messages:
    59
    Location:
    Albuquerque, NM
    Guys,

    First of all, nice board with alot of great info.

    I'm working on a 300wsm elk load. A combination I want to try is 180gr. Hornady Interbond with either W760 or IMR4350. If anyone has the Hornady manual and can give me the corresponding max loads and velocity, I would appreciate it.

    John
     
  2. MCMXI

    MCMXI Member

    Joined:
    Jul 1, 2008
    Messages:
    7,128
    Location:
    NW Montana
    Not quite the bullet you were asking about but here's some data from Hodgdon's web site for a 180 grain bullet and IMR 4350 ...

    http://data.hodgdon.com/main_menu.asp

    180 GR. SFT SCIR
    IMR 4350
    .308"
    C.O.L. 2.860"

    61.0 grains
    2808 fps
    52,800 PSI

    65.0C grains
    2991 fps
    63,700 PSI

    I use RE22 in my .300WSM loads and I don't have a Hornady manual ... I have Sierra, Speer and Lyman manuals ... and WELCOME to the site! :D

    I'm sure someone will be along shortly to help you out.

    :)
     
Thread Status:
Not open for further replies.

Share This Page