• You are using the old High Contrast theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.

How do I replace a Star BM recoil spring?

Status
Not open for further replies.

Tuckahoe

Member
Joined
Mar 14, 2005
Messages
16
How do I change the recoil spring on a Star BM? I've got a new spring from Wolf but I can't figure out how to get the old spring off the guide rod. It's a captive spring and I've never messed with one of these before.
 
Tuckahoe,
Push the spring sleeve toward the rear and grip the exposed shank in your vise (soft jaws), then unscrew the head from the shaft. I use an adjustable wrench but pliers will do if you are carefull not to booger it up. Be careful the thing is under tension, wear your safety glasses. Replace the old spring with the new and screw it back together.

Sam
 
Thanks for the help Sam. I got it changed, needed 3 hands to do it even with the vice but it's done. :)
 
Status
Not open for further replies.
Back
Top