How do you store your handgun?

Status
Not open for further replies.
Joined
Aug 14, 2008
Messages
539
I've heard do not store in the cases with foam because the foam will absorb and cause the gun to rust that it is best to wrap in a gun cloth so i did that.

But now on some gun clothes NOT to wrap gun in it,so now before placing in safe,i put each gun in those zipper gun pouches,i dont know what you call them...is that ok?

I really dunno whats correct....I would think it would be ok to store them in the cases with foam they are stored that way at the manufactureres,distributors and gun dealers but i dunno

So currrently i just keep them in the zipper pouches til i know if its ok
 
I would think that as long as you didn't store it one way and then just leave it like that for your great great grandchildren to find, you should be ok.

I mean, you're going to be firing it right? Take it out and oogle it, caress it? So at those points, wipe it down.

Could be wrong, and depending on where exactly you're living things might be different, but I wouldn't sweat it too much.
 
I store all of my guns (handguns and rifles) encased in gun socks in my safe; which has plenty of desiccant packs to absorb any moisture as well as a dehumidifier rod. Each gun also has a protective coating of oil.
 
I usually keep mine out of the cases but in a locked and chained up toolbox. Its worked pretty well so far.
 
Is storing guns in those zipper pouches and then putting the pouch in a safe ok?

It wont damage the gun at all?
 
I like the idea of having them sort of on display when i open my safe and i can see them and wipe them down when in the mood.

For those wishing to put them in some sort of safe wrapping, here is a link that you might find helpful.

http://www.borestores.com/
 
If storing them for a long time I make quite a process out of it. Seems to have worked so far.

1. Remove all plastic/wood.
2. Clean all plastic/wood parts (coat wood with renaissance wax if desired)
and place same in heavy duty ziplock bags.
3. Complete detail cleaning (no fouling anywhere).
4. Dunk/coat all metal parts in clp.
5. Place gun in ziplock bag while still dripping with clp.
6. Stick bagged gun and parts in protective case.
7. Store as nec.
 
Foam is available as "closed cell" or "open cell". Closed cell foam doesn't hold moisture, one type is known as ethafoam....similar to what archery targets are made of. Open cell could be a problem.

I've kept guns stored in ethafoam storage cases for nearly 20 years with no issues. Some of those handguns are worth $3000-$5000 each.....if there was a problem doing so I wouldn't have risk it. Cases are also stored in the safe with a golden rod.

Everyones situation is different, wide temperature swings can create condensation problems.
 
I found some oven mitts that are just right to slip a semi or revolver into. Just oil it, wipe off the excess, and slip it in, put them in the safe.

Works good, you can pile them up so to speak, see what's in it, and they protect against bumps and scratches.
 
Oh for pete sake!!! Cut me a break!!! I've been storing my handguns in DOSKOCIL plastic cases with foam in them for so long that a couple of them have to have the gun oil wrung out of them on ocasion and I have never seen any deteriation on any of my 10 hand guns. I store them in their prospective cases in my safe and have a Golden Rod at the bottom rear for those that are not protected by a case (rifles & shotguns)...
 
Last edited:
Most of my firearms are stored in a safe with a golden rod and plenty of desiccant material. However, I do keep some handguns in lockboxes lined with foam. I've never had any problems with the finish on guns stored in the foam lined lock boxes. That said, I wouldn't store a collectible gun in such a container.
 
I live in a warm, humid climate. My guns are stored in a gun safe in coated wire racks to keep air flowing and avoid condensation (dehumidifier in safe). I have two defensive pistols in a quick access safe - these get enough use and cleaning that I don't worry about humidity as much. However, my house is climate contolled, so this is all overkill, I suppose.

Storing in a case or sock is fine if your firearm is clean and dry when put up. I have seen hunting rifles put away for just a few days and condensation or moisture from rain did some damage.
 
temperature swings is what kills metal. What you are trying to avoid is condensation. A chunk of steel is not going to be the same temp as the air around it when the air temp changes fast. If the metal is significantly colder than the air around it, then moisture from the air will condense on the cold surface of the metal just like it does on a cold glass of water on a hot humid day.

The best way to avoid condensation is to keep guns indoors in a climate controlled space, and keep them uncovered out in the open. Look at them frequently. Handle them frequently. Wipe them down everytime you handle them.

Also, buying stainless guns helps too.:)
 
I store all of my guns (handguns and rifles) encased in gun socks in my safe; which has plenty of desiccant packs to absorb any moisture as well as a dehumidifier rod. Each gun also has a protective coating of oil.
The above is definitely the best way to store. I don't exactly do it the best way. Mine are in racks in the safe. Rifle racks are already in every safe, and I bought the Browning pistol racks. I use a de-humidifier.
 
I keep one laying in a leather holster on the dresser (for easy access to slide in my pocket).

My other I keep in a holster in a locked 50 cal ammo can

My AK is leaning against the wall in a soft case.

(all of the ammo is locked up, aside from what is loaded into the two pistols)

My next gun...I'll have to actually get a safe.
 
Gun Storage

I wipe down my guns with Gibbs - Since I started using this stuff, rust has not been an issue (5 years now). Got a friend who teaches police officers tactical shooting and firearms instructor courses. He had several Sims (training guns) in his trunk at one school. It rained and the trunk leaked. All the guns except for the ones that had Gibbs on them had surface rust. This stuff is good. Alcohol based - does not cause actions to get sluggish in cold weather or leave a lot of residue like petroleum based lubricants.



http://www.gibbsbrandlubricant.com
 
Keeping it simple, yet effective IMO

...

Fairly a simple process here, in that, I wipe each of my guns down with EEZOX, let them sit for 10-15 mins, then make a final wipe and then put each in an Uncle Mike's clip-on IWB Neoprene holster, which over time has absorbed some of the EEZOX and shows up on any of the guns that I pull out of the safe to check, or use, for that day. I especially like putting them in these inexspesive IWB holsters, as they protect each gun that is, lightly, stacked on top of another, in my small safe, as well as putting them on any furniture, table, etc., without fear of marking either the gun or the wood, etc., if they accidentally go down to hard, which has never happened, but with that and the trigger and trigger guard completely covered, make for a total care pkg that works.. (for me).

Over 1 year for all, and no rust, none, no additional scratches, none, and no holster wear (marks) none..

OMMV


Ls
 
I don't have any high end guns & I live in a fairly dry climate. I put plastic shelves in my gun safe then I put my hand guns on shop rags on the shelves. I have 1 that's been in it's original box for a year or so W/ no rust.
 
I use either "Break Free CLP" or Eezox after detail cleaning of each
handgun, then insert each firearm into a "Sack-Up" before placing
them in a "pistol rug"; and securing them in my RSC (aka: safe)~! ;)

No problems thus far, and thats almost 40 years of storing handguns.
 
Status
Not open for further replies.
Back
Top