How many Powder Measures?

[scythefwd]

two.. dillon and an old lyman

 

[witchhunter]

I've got a couple or three. I like the Redding BR-30 for rifles. I have an old uniflow for pistols.

 

[GLOOB]

I have one powder measure with quick change inserts for all of my rifle loads. I still throw pistol loads with dippers. I make a custom dipper for each pistol load.

 

[jolly roger]

Good grief..

2 RCBS Uniflows with micrometers Rifle and Pistol and auto dropping mechanisms
Redding 3BR
3 Lee Pro Auto Disks

Run the RCBS on my ancient Dillon 450 and an old RCBS 4x4 with auto drop
Run the Redding for my single stage rifle stuff
Run the Lees on Lee Classic Turret set up for my favorite loads for 44 Special, 45 Colt, and 45 ACP.

 

[fguffey]

I have an old adjustable dipper from about 1880, factory made old cowboy types from the 1880s. 2 Ohaus, One huge/heavy Hollywood Measure. Herters, cam operated, dial-O-matic, and 4 with rotors. Black and orange Lyman 55, Lee black, red and yellow dippers sets. Dillon? 5 on tool heads. 2 Little Dandy with rotors, 5 Uniflow with small and large rotors for 2 Piggy Back 11s and the other RCBS press that came complete with with powder measure with 2 rotors.

Then there are some Redding and Pacific powder measures along with a Texan. I also have C&H measures, no plastic to stain and or crack, cast iron, no threads, they bolt on, must be old.

F. Guffey

 

[Crashbox]

I have three Hornady LnL powder measures- one for .357 Magnum on the progressive, one for .40 S&W for same, and one for hand throwing of charges. Micrometer inserts for both pistol and rifle.

Also have an RCBS Chargemaster 1500.

 

[tallpaul]

half a dozen or so lee auto disks-
three rcbs uniflow- or so
a lil dandy rcbs
a lyman
an auhaus
4 dillons.. for now

 

[GW Staar]

A 40 year old uniflow that came with both sizes of cylinders
A 6 year old Uniflow with both cylinders, a mic, and a case-activated powder die/linkage that came with the Pro 2000.

Bought the Hornady case-activated die/linkage so I could use their powder thru expanders. Added another mic with both sized stems for the old Uniflow. (RCBS came out with their own even better expanders so I bought some of those....usable in either case-activated linkage system.

Bought another Uniflow 3 months ago. so I don't have to mess with progressive linkage on the other two, while I play with my old Rock Chucker and my new Summit.

 

[Arkansas Paul]

I have one.
It's a Uniflow that is god only knows how old.

 

[westy16925]

Hornady Auto Charge for large runs.
Redding for most small batches.
Hollywood for nostalgia.
Lee PPM + dippers to hold the other end of the powder bench down.

 

[Joatmon]

A few, couple of uniflows so old that they are painted that crap brown before RCBS went "green", Redding BR, SAECO, 2 Lachmillers, Ohaus duomeasure, couple of CH pushbuttons and a rotary, Belding and Mull, all told about a dozen. I like some of the oldies that have nice designs and features (Lachmiller). Some don't come out too much anymore.

 

[Kuyong_Chuin]

How many powder measures do you have? Do you have only one or more than one, set up for things such as rifle and pistol or other

Or do you have my one that does everything?

Only the one that came with the kit right now but going to get a auto disk type here soon.

 

[GT1]

3 Lee Pro Auto Disks
2 Dillons
1 Lee PPM(I use Perfect Adapters to put it on any press for any load I am not doing a whole bunch of, like big rifle )

 

[floydster]

I have nine total--thinking of another one

 

[Nappers]

2

1 RCBS with large precision measure - Rifle

1 RCBS with small precision measure - Pistol

 

[wally247]

I'm with Paul. Just one RCBS that's older than I am.