BMC
Member
CZguy:
Does that Remington have any stain or just the MAO?
Does that Remington have any stain or just the MAO?
dfariswheel said:After three coats as a sealer, apply a thin coat and allow to dry BONE DRY on the surface.
This may take 24 hours or more, and in some cases of really open grain wood, the first may not dry at all.
Using finer steel wool, steel wool the finish off the wood. As you steel wool, the surface coat will turn "muddy" looking so you can see it.
Be careful around proof stamps and sharp edges to not round edges off or thin stamps.
After steel wooling the stock down to bare wood, clean the stock with brushes or compressed air, then apply another coat, allow to dry and steel wool off.
Continue this until the grain of the wood is 100% FULL, and you can see NO open grain.
When held up to a light and sighted along the grain, open grain will look like tiny scratches in the surface.
BMC, is that wood spaulted?
Sorry I didn't reply sooner. If that spelling is correct, I don't know the term.
It's a REAL oil finish that looks like those seen on British double guns and American custom rifles.
Varnish typically is comprised of some sort of resin and a solvent. (Turpentine, mineral spirits, etc.)Varnish is an example of partial oil finish with a lot of dryers.
Varnish typically is comprised of some sort of resin and a solvent. (Turpentine, mineral spirits, etc.)
Looks like it was taken from the specification of a patent - are you the inventor?A varnish composition suitable for producing a liquid crystal aligning film
having a thickness of several tens to one hundred nanometers having 1 to
10% by weight of polyamic acid or soluble polyimide, and 90 to 99% by
weight of a solvent which comprises 5 to 80% by weight of at least one
compound selected from a group of solvent components A and 20 to 95% by
weight of at least one compound selected from a group consisting of
component B and component C where the group of solvent components A
consists of N-methyl-2-pyrrolidone and dimethylimidazolidinone and the
component B is alkyl lactate, and the component C is
R1-O(C3H.sub.6 O)nH (I)
where n is 1 or 2, R1 is an alkyl group having 4 carbon atoms when n
is 1, and R1 is an alkyl group having 1 to 4 carbon atoms when n is
2, is disclosed.