Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
You are using the old High Contrast theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.
I would suggest a bit of penetrating oil where the old barrel threads into the receiver. Gentle application of a wrench, with proper padding, to unscrew the barrel. May take multiple applications, and some time to penetrate.
can be done with a punch, hammer, and vice. probibly gunna need access to a press though. i donno much about the WASR's but if they are anything like thier Rommy G cousins they may fall to nothign short of a 20 ton press
if you manage to get the pinn out with out a press. you can use an automotive gear puller to push out the old barrel and the "all thread" method to press in the new barrel
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.