i would like to see a s&w 38 super

[Zaydok Allen]

With the 1911, you almost need to choose between the standard rimmed 38 ACP/Super brass or the rimless 38 Super Comp brass since there is enough of a difference in rim diameter between the two. I have decided to stick with Starline 38 Super Comp/9mm Largo brass since I also swap barrels on my 1911 to shoot 9x19.

The Starline 38 Super Comp and 9mm Largo rim diameter is 0.380" to 0.384" and all of my 9mm brass I measured is 0.386" to 0.389". Rimmed 38 ACP and 38 Super brass are around 0.400". So it is easier for me to tune my extractor for 38 Super Comp and 9x19.

Exactly right. And same with me. I load all my own as a result.

 

[Zaydok Allen]

I've shot 9mm and 38 Super out of my SIG Match Elite that left the factory as a 9mm. Barrel and recoil spring is the only difference since 9mm feeds perfectly from my CMC 38 Super mags. I haven't touched the extractor because function is great and I don't wanna screw it up, but it's probably a little tight on the conventional 38S brass.

I remember when you were working that out. Glad to hear you got it.

My favorite load is a case full of VV N105 compressed by a 124gr Nosler Sporting Handgun. It's running a touch over 1400 and has proven to be pretty lethal. On bowling pins.

Exactly! Love that load!

 

[someguy2800]

I would really like for them to take the shield 45 and make it in 10mm.