Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

interarms semi-auto shotgun

Discussion in 'Shotguns' started by two gun charlie, Mar 1, 2013.

Thread Status:
Not open for further replies.
  1. two gun charlie

    two gun charlie Member

    Joined:
    Aug 19, 2011
    Messages:
    293
    Location:
    Republic of South Africa
    ok I feel a little stupid :eek: I bought this shotgun , Atis 12 guage , semi-auto,
    and I can't get the action out :scrutiny: it seems with many other semi-auto's
    you just remove the barrel , pull or screw out the little operating handle and the action slides out , easy , but I can't see any way that this handle can pull out so there it is , stuck :scrutiny: hope someone on this site has a similar shotgun :D
     
  2. Deer_Freak

    Deer_Freak Member.

    Joined:
    Dec 20, 2012
    Messages:
    662
    Location:
    North Carolina
    Post the exact brand and model I am sure there is a owners manual online. We can help you but you have to help yourself first.
     
  3. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    If it's the one I think it is??

    Look for a flat blued metal piece with a friction-grip surface on the bottom of the bolt. It sits in a long dovetail groove.
    There is a pin near one end of it.

    The spring-loaded pin must be depressed, and the metal piece slid forward and out.

    The bolt handle assembly can then be removed through the ejection port.

    rc
     
    Last edited: Mar 1, 2013
  4. two gun charlie

    two gun charlie Member

    Joined:
    Aug 19, 2011
    Messages:
    293
    Location:
    Republic of South Africa
    ok I see everything just the way you describe it , except that the pin seems to be a part of the metal piece and cannot be depressed
     
    Last edited: Mar 1, 2013
  5. two gun charlie

    two gun charlie Member

    Joined:
    Aug 19, 2011
    Messages:
    293
    Location:
    Republic of South Africa
    here is what I see :D
     

    Attached Files:

  6. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    O.K.
    I remembered wrong I think.

    See the little slot by the pin head?

    Stick a thin screwdriver blade in it and see if you can pry it up?

    Quite frankly, I have only seen one of them.
    And that was too long ago to remember how it comes out.
    I just know it has too to get the bolt handle out.

    rc
     
    Last edited: Mar 1, 2013
  7. two gun charlie

    two gun charlie Member

    Joined:
    Aug 19, 2011
    Messages:
    293
    Location:
    Republic of South Africa
    not coming up , are we talking a lot of force ? it does depress quite easily though , but it makes no difference to how far the metal piece can slide forward

    I have been looking around but can't find much information on this shotgun , everything so far was easy to figure out , I am pretty much just waiting to run into someone who has one or had one to give me a hint on what to try , in the meantime I just fiddle with it , eventually something will go click.

    So far I know it was made in Brescia , Italy , imported by interarms , called an Atis , a copy of a certain model browning , but I checked , it does not come apart quite the same way as the browning it emulates.
     
    Last edited: Mar 1, 2013
  8. two gun charlie

    two gun charlie Member

    Joined:
    Aug 19, 2011
    Messages:
    293
    Location:
    Republic of South Africa
    ok

    :D you were right , I just used "insufficient" force
     
Thread Status:
Not open for further replies.

Share This Page