I switched over from $10 Hornady One Shot sprsy lube to the homeade stuff and love it. It is a lot cheaper and does a better job of lubeing your cases.
Use Liquid Lanolin. You can buy it at Walmart.com
Or on E Bay.
Then get the red bottle of Heet Dry Gas.
I bought a semi see thru spray bottle of cleaner at walmart for 99 cents to use as my lube spray bottle.
Mix it ten to one.
I measured up 4 1/2 inches and put a line with a black sharpie pen.
Then measured up another 1/2 inch and put a line with the black sharpie.
Put the dry gas up to the first line, then the liquid lanolin up to your next line.
Shake it up and you are good to go.
After you spray your cases let yhem sit for five to ten minutes to give the achohol time to dry so you just have the lanolin on the cases for your lube.
If you jump the gun and resize before the achohol has time to dry you will get a STUCK CASE!.
You should buy or put together a stuck case set up.
I bought the stuff to remove stuck cases.
I drill bit, a 1/4 - 20 tap, a 9/16 socket, some 1/4 flat washers, a 1/4 - 20 bolt.
Wecome to the HighRoad and enjoy youself.
If you have any problems or questions feel free to ask. We are here to help each other.