gonoles_1980
Member
I have some 9mm's I loaded up for the first time, the OAL is 1.125 with a 124 gr Xtreme FP copper plated bullet. Looks like the two factory bullets I have are 1.112 (RN) and 1.075 (HP), both factory rounds are 124gr bullets.
The two factory bullets drop right into the gauge. The bullet I loaded has the rim of the bullet sticking up out of the gauge.
I measured the bullets at the crimp, the two factory bullets measure .3765, my load measures at .3805 at the crimp.
I'm thinking to resolve, I need to adjust the crimp on the FCD slightly tigher.
The two factory bullets drop right into the gauge. The bullet I loaded has the rim of the bullet sticking up out of the gauge.
I measured the bullets at the crimp, the two factory bullets measure .3765, my load measures at .3805 at the crimp.
I'm thinking to resolve, I need to adjust the crimp on the FCD slightly tigher.