giggitygiggity
Member
- Joined
- Mar 18, 2009
- Messages
- 2,251
I want to use this thread as an opportunity for you to post what size holes and powder you use for specific loads when using the Lee Auto Disk Powder Measurer. This way, for non-listed loads, people can refer to this thread as REFERENCE so that they do not have to do as much trial and error to find the correct hole/powder combination. Remember, do not rely on the information in this thread. People can type incorrect information. Always verify everything yourself.
With that being said, here are a few combinations that work for me:
.223 Remington
55 grain FMJ CCI SP H335 1.46CC (about 23.5 grains of powder)
.40SW
180 grain FMJ CCI LP Titegroup 40CC (about 4.65 grains of powder)
.45ACP
230 grain FMJ Wolf LP Titegroup 40CC (about 4.65 grains of powder)
With that being said, here are a few combinations that work for me:
.223 Remington
55 grain FMJ CCI SP H335 1.46CC (about 23.5 grains of powder)
.40SW
180 grain FMJ CCI LP Titegroup 40CC (about 4.65 grains of powder)
.45ACP
230 grain FMJ Wolf LP Titegroup 40CC (about 4.65 grains of powder)