New to reloading here. Well attempting to anyways about a month ago I got a case stuck in a 444 die. Sent in to Lee precision and replaced. Lesson learned never resize and deprime a case once wipe,wipe the lube off and run it through again.
How tuff are the columns on the Lee Classic? I removed the decapper primer clamp from the sizing die and tried to knock out the brass that way while it was mounted in the press,before I finally gave up and sent the die in to Lee
Thank You
How tuff are the columns on the Lee Classic? I removed the decapper primer clamp from the sizing die and tried to knock out the brass that way while it was mounted in the press,before I finally gave up and sent the die in to Lee
Thank You