The auto disk is working well for me. I also use the adjustable charge bar. At first I had consistency problems with the small charges, not to mention 2 squibs (my fault because I wasn't looking into every case). I attached a vibrator to the powder hopper which helped immensely, even with Unique. More recently, I found the discussion on loadmastervideos.com about the design flaw of the adjustable charge bar, tried the recommended fix and no longer need/use the vibrator. I haven't retried it with Unique though. BTW, I'm using an upgraded auto disk, not the pro version.
lee pro 1000 vs. lee loadmaster
- Thread starter pvthouse
- Start date
- Status
pvthouse,
I use canned air on my reloading bench. Sure it's a 50 gallon can that has a motor attached to it but same thing right. Here's a Loadmaster specific video on lubing the LM but same products can be used on the Pro1000. Well kind of. http://www.youtube.com/watch?v=C1TBU_eN1cQ
I use canned air on my reloading bench. Sure it's a 50 gallon can that has a motor attached to it but same thing right. Here's a Loadmaster specific video on lubing the LM but same products can be used on the Pro1000. Well kind of. http://www.youtube.com/watch?v=C1TBU_eN1cQ
LiveLife
Member
Canned or compressed air is fine. I keep a small brush on the bench and use paper towel to wipe everything down with oil bottle/Q-tip for lubing.
As to lube, I used to use BreakFree, but now use any conventional/synthetic motor oil leftover from oil change (typically 5-30W/10-40W).
As to lube, I used to use BreakFree, but now use any conventional/synthetic motor oil leftover from oil change (typically 5-30W/10-40W).
I bought a used loadmaster from a guy that couldn't make it work. I've got it working just fine in four different calibers and about to add 2 more. It just needed some adjustment. Yes, I crushed a couple of primer sliders at the start but that was because I didn't read and understand how things worked. Once I stepped back and studied a bit I've not had any problems other than an occasional flipped primer. Bottom line is it is much faster than my single stage, loads great ammo, and I'm completely satisfied with it.
Kent
Kent
- Status
Similar threads
- Locked