Lokichoki
Member
- Joined
- Nov 2, 2016
- Messages
- 297
Are you still talking about 38spc? Cause your asking for a 38spc loading for 9mm projectile right now by going through this and stating you didn't see load data. If so The diameter difference in the projectile while small does not work well with 38sp dies, you will probably have to crimp heavily or maybe run the top of the 38 case into a 9mm die to get it closer to the .355" diameter. I know I've used .308 for 7.62x54R and x39 before with mixed results but there is a special neck sizer for doing just that