Loading for my M1A

[xtarheel]

Looking for suggestions in loading for my M1A. I would like to put together a 147 grain military duplication load. I have various reloading manuals, but being a semi auto, I want the proper pressure curve for this piece.

I'll pick up small base dies, but was wondring what is the best powder to use? I use IMR 4895 in my three Garands, so am I assume this powder would also be good for the .308/7.62?

 

[GunTech]

IMR4895 or H4895 are idea for the M1A. You want powders with about the same burning rate to ensure proper port pressure. 4895, 2520, N135 and similar powders are all ideal.

You'll want to download this freebee from Glen Zediker

http://www.zediker.com/downloads/m14.html

 

[xtarheel]

Thanks GunTech. Great information.

 

[USSR]

I use IMR 4895 in my three Garands, so am I assume this powder would also be good for the .308/7.62?

Yep, great powder for your application. Assuming you are using milsurp brass, somewhere's between 43.0gr and 44.0gr of IMR4895 will work fine.

Don