• You are using the old Black Responsive theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.

Long range tuning

Just got back from a buddies shop ( he has a bore scope) the barrel I just took off doesn’t have a carbon ring or build up, just a bit along the lands, there is some pitting in the throat along with some fire cracking but not horrible at all.
I may have it set back.
Added . I’ve been scrubbing on this barrel for almost 2 hours with everything I’ve got and could still get traces of black on a patch. I may never get every bit of carbon out of the fire cracking.:thumbdown:
 
Last edited:
I shot this 16 shot ladder at 500 yards on a fresh barrel today, I’m liking this lower node ( DBL) 30.4 however with only 48 rounds total on the barrel I won’t place to much stock on it until it speeds up a tad but it’s close enough for seating tests.
My pal think that 30.9 would be his choice and since he’s the WR holder I’ll go that direction.

IMG_2008.jpeg
 
Last edited:
IMG_2026.jpeg After a less than stellar seating test at 30.9, and what I mean by that is I felt the rifle was spitting rounds at varying depths and some very ODD chronograph numbers ( top left is 40 fps) I decided to reshoot my charge ladder at s seating depth very close to the original ( top left) +.008.
I had an opportunity yesterday afternoon to do just that. My high node~ 30.9 is still there but with the now 94 rounds the lower node has shifted slightly to 30.5 and reshot on sight at the red + ( still about 1/4 vertical but overall smaller at 3/4 C-C at 500 yards, now the odd part is those three shots had a 25fps ES ?
Go figure that out ..
That’s all for now, shoot small y’all
J
IMG_2044.jpeg
 
Last edited:
After a good cleaning and throat measuring,I set up a seating review with the new numbers.
.006 jam and .008 jam, even though the wind was a tad switchy I believe the data is decent.
IMHO the .006 jam is ready to rock.
 

Attachments

  • IMG_2075.jpeg
    IMG_2075.jpeg
    128.1 KB · Views: 17
Last edited:
So @JFrank what does that info tell you I am wanting to learn more about this kind of thing?
Me too’
From this ladder I could load 31.5 and order another jug of N140, ( from the gurus) nodes repeat about 3% so on this test that’s 32.4 and right where the upper overlap is. Myself being a cautious fella I’ll probably shoot on each side of 31.5 to see a repeat.

Thanks for asking.
Jim
 
Back
Top