I have a Hornady LNL AP press with Hornady powder measure, micrometer and PTX. This unit is very reliable and accurate, but I now have a Mr. BF and I'm dealing with interference either with the primer feed tube or the bullet feeder die. Currently have my RCBS lockout die installed so the powder measure linkage is rubbing on the primer feed tube. A slightly slimmer unit would rectify this issues, but I don't have an stores nearby that sell reloading equipment.
Anyone know if one of the other popular units would be smaller than the Hornady? FWIW, I'm only loading 9mm at this time and pretty soft loads at that so I need a micrometer measure that's reliable at sub-4 grains.
My only other option is to drop the lock-out die, move the powder measure next to the BF die and deal with that interference.
Thanks,
Rick
Anyone know if one of the other popular units would be smaller than the Hornady? FWIW, I'm only loading 9mm at this time and pretty soft loads at that so I need a micrometer measure that's reliable at sub-4 grains.
My only other option is to drop the lock-out die, move the powder measure next to the BF die and deal with that interference.
Thanks,
Rick