Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

lyman 1200 dps powder dispenser and h110

Discussion in 'Handloading and Reloading' started by tinch, Jan 3, 2008.

Thread Status:
Not open for further replies.
  1. tinch

    tinch Member

    Joined:
    Dec 27, 2007
    Messages:
    17
    Has anyone found a digital powder dispenser that will work with H110. Mine keeps binding up and stops the feeder. Works really well with larger grain powders such as Varget.
     
  2. IThunter

    IThunter Member

    Joined:
    Jun 30, 2005
    Messages:
    83
    Location:
    Indiana
    H4227 should work well also...I have run into the same problem.
     
  3. tinch

    tinch Member

    Joined:
    Dec 27, 2007
    Messages:
    17
    Any experience with the Dot powders in the dispenser. (red, green, blue etc)
     
  4. mbpautz762

    mbpautz762 Member

    Joined:
    Sep 13, 2007
    Messages:
    131
    I got a Lyman 1200 DPS for Christmas. I use bluedot for 10mm, and it handles it perfectly. it's also the only measure I've been able to get perfect 800x loads from. Best Christmas present ever :)
     
  5. tinch

    tinch Member

    Joined:
    Dec 27, 2007
    Messages:
    17
    I agree the 1200 DPS works great and is very accurate with all but the finest grain powders. Makes the process move along quite quickly and you know your loads are exactly what you wanted. Trying some loads with H4227 instead of H110 to be able to use the 1200 DPS. H4227 works great in it. Usually us it for loading 7mm-08 using Varget which also run through very well.
     
Thread Status:
Not open for further replies.

Share This Page