NECESSARY for cast bullet work here
They dont make a good means to insert a cast bullet in a 7.62 x 39 case during reloading. The .32 M-Dies bell the case exactly as I need them.
Since Lee's turret press is set up for belling the case on the upstroke to charge the powder in the rifle charging die connected to the autodisc powdermeasure I decided to hybridize the M-Die tip to it.
The 7.62 x 39 rifle charging die insert in the die is suited for the jacketed bullet. I sawed off the end, drilled and tapped a 3/8 x 24 tpi hole in the end and screwed the .32 cal M-Die tip into it, and once the length was adjusted for best belling, I was able to auto-bell the case for cast bullets while charging powder with the Lee Turret press.
Now, with my Dillon, I use their .30 carbine insert for their powder charging die and it achieves the same thing for 7.62 x 39 cast loads as well as .30 carbine (which I reload too.)
The rest of the M-Die has been in a drawer for 6 years
yodar