M&P Trigger Job

[Section 8]

I am looking for options for a trigger job for a M&P (overtravel/take-up/reset, reduced weight is not needed).

So far I have found Bowie Tactical. I do not like having only one option.

Thanks

 

[Anna's Dad]

www.burwellgunsmithing.com

 

[Jason_G]

My dad is a sergeant with the Marshal's office where I live. Their whole office just got new M&P's and M&P compacts as their primary and BUG. They are all at Jerry Miculek's family's shop having the triggers lightened right now.
Clark's Custom Guns
http://www.clarkcustomguns.com/index.htm
HTH.

Jason

 

[..]

Do it yourself http://www.burwellgunsmithing.com/M&Ptriggerjob.htm

 

[Coronach]

I'll ditto Burwell gunsmithing. I have just had one done to my M&P40c, and it is exactly what you describe; the pull is cleaned up, the break is crisp, overtravel has been reduced to the absolute minimum, and the reset is short and affirmative. You can get reduced weight, but I opted not to go that route.

Mike

 

[FieroCDSP]

You know, I never really felt that the M&P factory trigger was bad. But then again, I started out with a Sigma.

 

[FieroCDSP]

You know, I never really felt that the M&P factory trigger was bad. But then again, I started out with a Sigma.

 

[daysleeprx]

I'll ditto Burwell gunsmithing. I have just had one done to my M&P40c, and it is exactly what you describe; the pull is cleaned up, the break is crisp, overtravel has been reduced to the absolute minimum, and the reset is short and affirmative. You can get reduced weight, but I opted not to go that route.

Mike

How long was the turnaround for the trigger job?

 

[zahc]

I did mine myself; very happy. Short, crisp, nice reset and still heavy.

 

[Coronach]

How long was the turnaround for the trigger job?

Since I stopped by his shop, I think it took about 15 minutes.

Mike

PS I think his turnaround is less than a week, not counting shipping to and from. Email him and ask.

 

[Coronach]

You know, I never really felt that the M&P factory trigger was bad. But then again, I started out with a Sigma.

It's not. But it does get better with some help.

Mike

 

[bigcim]

Is ther one of these trigger jobs for the sigma

 

[JA]

Ditto on the Sigma trigger job.
My M&P 45 has a smooth light trigger pull right out of the box.
But my Sigama SW9VE Allied Forces almost requires two fingers to pull the trigger!

 

[cbsbyte]

Here in Mass, all double action pistols must have a 10lbs trigger pull to be legal for sale in the state. S&W had to change out the triggers on Mass compliant models. The M&P triggers are terrible.

 

[Coronach]

Do they have to stay that way?

Mike

 

[cbsbyte]

Do they have to stay that way?

That's a hard question to answer legally. I would assume you can modify the trigger as long as you keep it, but if you sell the gun to someone else in the state then that could become a legal issue. I believe a FFL dealer could not resell the modified gun to someone in the state.