Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Makarov reloading

Discussion in 'Handloading and Reloading' started by biogenic, Sep 23, 2011.

Thread Status:
Not open for further replies.
  1. biogenic

    biogenic Member

    Joined:
    Feb 16, 2011
    Messages:
    268
    Any of you guys use Missouri bullet 93gr? What's you favorite recipe ??
     
  2. res45

    res45 Member

    Joined:
    Sep 23, 2007
    Messages:
    550
    Location:
    North Carolina
  3. biogenic

    biogenic Member

    Joined:
    Feb 16, 2011
    Messages:
    268
    Thanks much for the info and link !
     
  4. JDGray

    JDGray Member

    Joined:
    Sep 16, 2005
    Messages:
    5,129
    Location:
    SW MI.
    Missouri bullet 93gr lrn, 3.6gr 231, .975" oal

    Hornady 95gr XTPs, 4.0gr 231, .965" oal 1000fps

    These are my loads:)
     
  5. armarsh

    armarsh Member

    Joined:
    Nov 17, 2009
    Messages:
    419
    Location:
    Southwest MN
    I like 4.0 grains of Green Dot. I have not shot Missouri's though. Either Berry's or Hornady XTP's.
     
  6. jcwit

    jcwit Member

    Joined:
    Oct 19, 2007
    Messages:
    7,993
    Location:
    Great state of Indiana
    I believe I would do a search thru the powder manufactures rather than take load data from unknown folks on the internet, even tho their intentions are well ment. Just MHO
     
  7. Hondo 60

    Hondo 60 Member

    Joined:
    Sep 6, 2009
    Messages:
    5,256
    Location:
    Manitowoc, WI
    I agree with jcwit.
    No offense to the helpful thr members, but what if they mistyped or looked at the data wrong?

    Just my 2¢
     
  8. biogenic

    biogenic Member

    Joined:
    Feb 16, 2011
    Messages:
    268
    3.6 to 4.0 grain is within range. I always double check my loads with my manuals anyway... I do appreciate your concern however.
     
  9. JDGray

    JDGray Member

    Joined:
    Sep 16, 2005
    Messages:
    5,129
    Location:
    SW MI.
    The man asked for recipies, he got ours:) He certainly don't have to use them, and better check them against published data. (which he did)
    Mine result from what my Lee Pro Auto Disc cavities will drop within the min-max spectrum;)
     
Thread Status:
Not open for further replies.

Share This Page