sixshooter
Member
If I assemble the bolt properly (read: so the safety works) then the firing pin sticks out a bit, and binds on the round as the bolt is cycled. If I don't thread the firing pin / safety subgroup all the way in (or back it out one turn) then the action feeds properly, but the safety won't engage (because it's backed out from the sear).
My guess is that the firing pin is too long, or the sear is worn. Suggestions? I'll try to do some pics and maybe a video in a bit.
My guess is that the firing pin is too long, or the sear is worn. Suggestions? I'll try to do some pics and maybe a video in a bit.