Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Model 29's... Where to buy a used one?

Discussion in 'Handguns: Revolvers' started by shogun7788, Jul 6, 2010.

Thread Status:
Not open for further replies.
  1. shogun7788

    shogun7788 Member

    Joined:
    Jun 3, 2010
    Messages:
    12
    Hey folks,

    As I gazed with awe and wonder on my dad's new Ruger Redhawk I knew then that I wanted a .44 magnum. Watching the 'Dirty Harry' movies only furthered that want. :D

    So now here I sit on the laptop scouring the internet for a reasonably priced model 29. I always hear about guys picking up their 29 for a song.

    It seems that most of the Model 29 prices are quite high, imho, past the $750 mark. Are there any -cheaper- Model 29s to be had? I found a few listings for 29s that sold for $450-650.

    Just wondering if you guys know anything and wish to pass your wisdom onto a poor college student.

    And if y'all have any good info or pictures please post some!
     
  2. Schofield3

    Schofield3 Member

    Joined:
    Mar 12, 2008
    Messages:
    635
    Location:
    New Mexico
    Are you set on a particular barrel length?
     
  3. Schofield3

    Schofield3 Member

    Joined:
    Mar 12, 2008
    Messages:
    635
    Location:
    New Mexico
    I would check your local papers and gun shops; if your buying online you check out budsgunshop.com - you may find one on here as well...
     
  4. shogun7788

    shogun7788 Member

    Joined:
    Jun 3, 2010
    Messages:
    12
    Barrel Legnth

    I don't want anything shorter than a 6 inch and no longer than the 8 1/2 inch.
     
  5. Schofield3

    Schofield3 Member

    Joined:
    Mar 12, 2008
    Messages:
    635
    Location:
    New Mexico
    haha if you find one longer than the 8 3/8" model let me know,
     
  6. shogun7788

    shogun7788 Member

    Joined:
    Jun 3, 2010
    Messages:
    12
  7. Schofield3

    Schofield3 Member

    Joined:
    Mar 12, 2008
    Messages:
    635
    Location:
    New Mexico
    I stand corrected! and thank you for letting me know
     
  8. bluetopper

    bluetopper Member

    Joined:
    Dec 17, 2005
    Messages:
    3,253
    Location:
    Northeast TX
    Might keep an eye out in the classified sections on the various gun forums but you can always find one on gunbroker or auctionarms. The longer the barrel usually the cheaper the price.
     
  9. oneounceload

    oneounceload member

    Joined:
    Apr 24, 2008
    Messages:
    15,710
    Location:
    Hot and Humid FL
    The prices you mentioned are NOT high, even if they are above your current limited resources for gun expenditures.

    That gives you several options - keep looking for a deal, save up to meet the current market price, or get a cheaper alternative
     
  10. joed

    joed Member

    Joined:
    Sep 17, 2009
    Messages:
    2,185
    Location:
    Ohio
    You don't want a barrel over 6", trust me. If you look around you should be able to find a good S&W 29 or 629 for about $550. I just sold a nice 4" 629-1 for that. Keep looking, they're out there.
     
  11. CraigC
    • Contributing Member

    CraigC Member

    Joined:
    Jan 27, 2006
    Messages:
    15,289
    Location:
    West Tennessee
    Unfortunately prices are not what they were five years ago when you could have your pick of 20-30yr old N-frames for $400. Expect to pay at least $500 or more for a good pre-lock model 29. Most online will be more. I paid $850 for a NIB model 24 six months ago and while was glad to get it. I won't deny that the price tag did sting more than a little but I'd been waiting a long time to find a good one at a halfway decent price. Life is short and you have to decide how long you can wait.
     
  12. shogun7788

    shogun7788 Member

    Joined:
    Jun 3, 2010
    Messages:
    12
    Yeah, I could handle up to about $600-$650 right now. Much more than that will hurt. But, I'll keep my eyes about me to find -the- right gun. :cool:
     
  13. Phydeaux642

    Phydeaux642 Member

    Joined:
    Jul 16, 2007
    Messages:
    1,655
    I want one, too. But, I want a 4" barrel. I have a feeling I'll be looking awhile since I tend to just buy at local shops.
     
  14. bluetopper

    bluetopper Member

    Joined:
    Dec 17, 2005
    Messages:
    3,253
    Location:
    Northeast TX
    gunbroker.com has been invaluable to me over the years living in a fairly small town with scant few gun shops. I've found some very nice classic guns at descent prices I would have never found otherwise.
     
  15. rd2007

    rd2007 Member

    Joined:
    Oct 17, 2009
    Messages:
    317
    Location:
    San Antonio, TX
    If you don't mind adding a 6 to the front of the 29 and you qualify for their terms, this is the best deal I found and where I got my 629:
    http://www.budspolicesupply.com/catalog/product_info.php/products_id/2448

    Might want to call them and ask if it is really out of stock. Their website doesn't seem to update in real time.

    edit-just noticed the OP asked for used. This still fits near the high end of their price scale, though.
     
    Last edited: Jul 7, 2010
  16. Confederate

    Confederate Member

    Joined:
    Feb 19, 2005
    Messages:
    3,192
    Location:
    Arlington, VA
    Yep, it's a good price if you can get it. I see lots of stuff that are out of stock with great prices. Also, when you do get
    your 6/29, don't get carried away (see photos below). I wouldn't have a 4-incher, and tend towards 6-inch. Have you fired
    your dad's Ruger?

    629_3.jpg

    629_4.jpg
     
  17. captain awesome

    captain awesome Member

    Joined:
    Jul 18, 2009
    Messages:
    918
    Location:
    Mesa, AZ
    you might check backpage.com. its like craigslist except you can buy, sell and trade guns on it, and it seems at least in my area that is primarily what the "sporting goods" section is used for. I found a prelock model 29 on there a month ago for $500, no ffl transfer. it was missing the rear sight though, and the grips are pretty beat up. But lock up and everything else checked out perfectly. Some new grips and a sight and its a great piece.
     
  18. bluetopper

    bluetopper Member

    Joined:
    Dec 17, 2005
    Messages:
    3,253
    Location:
    Northeast TX
    Confederate,

    I wonder what load was loaded up in that 629?:confused::eek:
     
Thread Status:
Not open for further replies.

Share This Page